For this purpose, all the MF series power amplifiers has a “soft-clipping” circuit that acts
on the output power by comparing the input and output signals. Once it detects a distortion or
other noticeable cut, it stabilizes the integrity of the output signal thereby avoiding overloading
and saturation levels that might damage the system.
Monoblock chassis
The chassis is of construction of a single piece: the efforts of the different subsets of the
equipment fall on an only piece of laminate steel of great thickness and reinforced toward their
union with the wings. Avoids the breaks and the “loss of screws” because of the own vibrations
give them teams in continuous tour.
Under control
The conception of the new loudspeakers, especially the uses for low frequencies is
based on that the amplifiers that govern them behave as ideal tension amplifiers, is say with
zero output impedance. The MF series approaches to this value nearly zero presenting a
damping factor better than 700 what redounds in a perfect control of the position of the reels
along all their excursion.
Naturally, you want to use your power amplifier, but before beginning is important that
you read this manual. This manual will help you to install and use your new power amplifier. It
is very important that you read it carefully, mainly the paragraphs marked as NOTE,
PRECAUTION and DANGER, for your security.
Save the original packing, you could use if you need to transport the power amplifier.
NEVER SHIP THE POWER AMPLIFIER WITHOUT IT'S ORIGINAL PACKING.
ALTAiR
PROFESSIONAL POWER AMPLIFIERS MF SERIES
4
