constructed of masonry or timber studding clad in plasterboard.
•
Before commencing work, a risk assessment must be carried out,
to confirm that the wall can support 3 times the weight of the
screen and all its accessories.
•
Do not use this product for anything other than its intended
purpose
•
Electrovision accepts no responsibility for damage to the wall nor
the appliance attached to the bracket, nor any consequential
damage or injury caused by improper installation, improper use,
overloading or unauthorised modification of the product.
INSTALLATION
1a. If the screen has a flat back, attach the vertical parts of the
bracket to the mounting
holes in the screen using the
16 mm machine screws,
plain washers and
shakeproof washers as
shown. Check that the
screws used have the
correct threads to fit properly
into the female threads on
the screen. Do not drill into
the back of the screen.
[F/G/H]
[D/E]
[L/M/N]
1b. If the screen has a curved back, attach the vertical parts of the
bracket to the mounting holes in the screen using the 16 mm
machine screws, plain
washers and shakeproof
washers, inserting the
spacer [C] between the
bracket and the back of the
screen. Check that the
screws used have the
correct threads to fit properly
into the female threads on
the screen. Do not drill into
the back of the screen.
[ C ]
[I/J/K]
[D/E]
[L/M/N]
Page 3
