ALTA SOLANA SHADES Product Care & Warranty Download Page 2

Dusting

Dust your blinds regularly using an ordinary soft, clean cloth, chemically-

treated dust cloth or mitt, feather-like duster, or cylindrical dust brush 

specially designed for blinds.

Vacuuming

For deeper cleaning, vacuum gently with a brush attachment.

Compressed Air/Hair Dryer

Use a can of compressed air or a hand-held hair dryer on the COOL 

setting to blow off dust and debris.

Spot Cleaning

Faux Wood Blinds only. Use a soft cloth or sponge moistened with 

lukewarm water and mild detergent if needed. DO NOT USE to clean 

Wood Blinds.

Bathtub Cleaning/Water Immersion

Faux Wood Blinds without cloth tapes only. DO NOT USE to clean Wood 

Blinds.
Immerse entire blind in lukewarm water with a mild detergent and 

gently move the water around with your fingers. Rinse with clear water. 

Close blind before removing, and hold vertically allowing the excess 

water to drain off. Re-install the damp blind into the window. Lower the 

blind all the way down and allow to dry completely.

Aligning Your Blind

After the blind is installed, tilt it open, then raise and lower it several 

times. This will allow the cords and slats to align themselves.

Cordless Lift Blinds

 

Firmly grasp the center of the bottomrail, then lift or lower the blind to 

the desired position.

Cordless Lift & Lock™ Blinds

 

Push and hold the button on the bottomrail to lift or lower the blind. 

Release the button to lock the blind into place.

Motorization

 

Press button on remote to tilt slats open and closed.

Standard Blinds

 

Tilting The Slats: 

Pull down on either one of the tilt cords or twist the tilt 

wand until slats reach the desired position.

Raising Your Blind: 

Ensure slats are in the open position, then pull the lift 

cord downward until the blind reaches the desired height. Release the 

cord and the blind will automatically lock into place.

Lowering Your Blind: 

Gently pull the cord toward the center of the blind 

until the lock releases. Let the cord slip slowly through your fingers until 

the blind reaches the desired height. Move the cord toward the outside 

of the blind and release. The blind will automatically lock into place.

CARE & CLEANING GUIDELINES

OPERATING INSTRUCTIONS

Reviews: