B L I S S S O L A R P A N E L
|
R E F E R E N C E G U I D E
9
Solar Panel
USB charging cable
Micro-USB Port
Solar Panel
USB charging cable
Micro-USB Port
BLISS Solar Panel Installation Guide
1. CONNECT WITH BUILT IN RECHARGEABLE BATTERY MOTOR
2. CONNECT WITH EXTERNAL RECHARGEABLE BATTERY PACK
Troubleshooting
Issues
Possible Causes
Solution
The motor has no response
Battery in motor is depleted
Recharge with compatible charger and check connection
and positioning of solar panel
Insufficient charging from Solar Panel
Check connection and orientation of solar PV panel
Remote control battery is discharged
Replace battery
Battery is inserted incorrectly into remote
control
Check battery polarity
Radio interference / shielding
Ensure remote control and the antenna on the motor are positioned
away from metal objects
Motor/Receiver distance is too far from Remote
Control
Move remote control to a closer position
Power failure
Check power supply to motor is connected and active
Incorrect wiring
Check that wiring is connected correctly (refer to motor installation
instructions)
Motor beeps 10 times when
in use
Battery voltage is low/PV (solar panel issue)
Recharge with charger or check connection and positioning of solar
panel
