Alstom Reason RPV311, Technical Manual

Page: 94 / 350

Chapter 4
– Configuration
RPV311
94 RPV311-TM-EN-6
10 FAULT RECORDER
The RPV311 allows user to register triggered and continuous fault recorder.
10.1
TRIGGER’D RECORDING
In this section, shown in Figure 31 , it is possible to configure the equipment's fault triggered recorder.
Figure 31: Fault recorder
– triggered recording configuration section
A The E
NABLED
check box allows user to enable the fault recorder feature.
B The P
RE TIME
text field allows user to enter the recording time before the event in seconds. The P
OST TIME
text field allows user to enter the recording time after the event in seconds. The T
IME OUT
text field allows
user to enter the maximum time in seconds, where the event will be recorded. The D
ISABLED FOR
–
MINUTES
IF MORE THAN
–
TRIGGERS IN THE LAST
–
SECONDS
allows user to disable recorder if the event repeats within a
programmed time period.