Alstom Reason RPV311, Technical Manual

Page: 80 / 350

Chapter 4
– Configuration
RPV311
80 RPV311-TM-EN-6
6 POWER CIRCUIT
Power circuits can be created of circuit voltage and current.
To add a new power circuit select the P
OWER
C
IRCUITS
section and fill in the following:
The I
DENTIFIER
text field allows user to enter a single code for the circuit being defined (maximum 12
characters). No editing allowed;
The V
OLTAGE CIRCUIT
scroll box allows user to select a code of the voltage circuit to be used;
The C
URRENT CIRCUIT
scroll box allows user to select a code of the current circuit to be used.
Once the circuit is created, it shows in the configuration interface menu. When selecting the circuit, a screen
shows the characteristics of the circuit selected, as shown in Figure 24 . It is possible to edit the voltage or
current circuit.
The frequency is calculated individually for each circuit as long as the magnitude of the voltage is over 10%
of the nominal magnitude configured in the Voltage Circuit window. The frequency track occurs within the
range of Nominal Frequency ±5Hz.
Figure 24: Adding and editing power circuits
The <R
ENAME
> button allows user to rename the circuit.
The <R
EMOVE
> button allows user to delete the circuit.