Alstom iSTAT M355 Manual Download Page 29

Page: 29 / 154

User Manual

M3x5/EN M/B

iSTAT M3x5

Page 27

8.7.6

Watchdog Output and Alarm Output (Combined)

The

M3x5

can be supplied with a module that combines a Watchdog output and an Alarm

Relay. The Alarm relay operates as if it is a part of an Alarm Output module.

The module has 3 terminals (see Figure 8-19) sharing an output common terminal.

When both I/O modules use this option, the

M3x5

can have 2 Watchdog outputs and 2

Alarm outputs.

FIGURE 8-19: WATCHDOG AND ALARM OUTPUTS

8.7.7

Analogue Input

The

M3x5

can be supplied with 2 analogue inputs. Various options are available. The

module has 3 terminals (see Figure 8-20), sharing an input common terminal.

FIGURE 8-20: ANALOGUE INPUTS

WARNING!

When only one resistance-temperature analogue input is used, the other must be short-
circuited.

Summary of Contents for iSTAT M355



























































































































































Search results

Summary of Contents for iSTAT M355

Reviews:

Related manuals for iSTAT M355

Brands by name

Popular brands

Alstom iSTAT M355, Manual

Search results

Summary of Contents for iSTAT M355

Reviews:

Related manuals for iSTAT M355

Brands by name

Popular brands