• Do not allow persons to operate or assemble the product until they have read this manual and have developed a thorough under
standing of how it works.
• Do not modify this product in any way. Unauthorized modification may impair the function and/or safety and could affect the life of
the product.
• Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger industrial equipment. There are
certain applications for which this equipment was designed. This product will be safer and do a better job at the capacity for which it
was intended.
• DO NOT use this equipment for a purpose for which it was not intended.
• Industrial or commercial applications must follow OSHA requirements.
• Risk of electrical shock, do not use in the environment with gas, combustible or explosive materials, hot objects.
• Use only under the recommended voltage and frequency requirements.
• The specification in this manual is based on standard lab testing, different environment may influence the data.
• Charge the light which has battery every 3 months if not in constant using, and after each use, if it is used often to ensure
longevity.
• Replace the battery with manufacture and battery designation only.
• Do not look directly in the light during operation of this unit. This can be harmful to the eyes ever for a brief period due to the intense
light.
• DO NOT handle this light or try to plug in charger when your hands are wet or damp or when you are standing on a wet damp
surface or water in water, always keep the plug dry.
• DO NOT use in potentially dangerous locations such as, flammable or explosive atmospheres.
AUD501H
CAUTION-PRODUCT USE AND CARE
• Before connecting light to a power supply, always check to ensure the power supply corresponds to the voltage on the nameplate of
the light. A power supply with a voltage greater or lower than that specified can result in serious injury to the user, as
well as
damage the light. If in doubt, do not plug in the light.
• This machine must be grounded while in use to protect the operator from electrical shock. This unit is equipped with an electrical
cord that has an equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching receptacle that
is properly installed and grounded in accordance with ALL local codes and ordinances.
• Do not force the product. Products are safer and do a better job when used in the manner for which they are designed. Plan your
work, and use the correct product for the job.
• Check for damaged parts before each use. Carefully check that the product will operate properly and perform its intended function.
Replace damaged or worn parts immediately. Never operate the product with a damaged part.
• Store the product when it is not in use. Store it in a dry, secure place out of the reach of children. Inspect the tool for good working
condition prior to storage and before re-use.
• Use only accessories that are recommended by the manufacturer for use with your product. Accessories that may be suitable for one
product may create a risk of injury when used with another tool.
NOTE : The warnings and cautions discussed in this instruction manual cannot cover all possible conditions and situations that may
occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but
must be supplied by the operator.
Warranty
Warranty for 2 years from the original purchase date.
THIS WARRANTY DOSE NOT COVER BATTERY OR ACCESSORIES NOR DEFECTS OR DAMAGES TO THE LIGHT
(I) after the warranty period expires; (II) resulting from misuse or abnomal opration; (III) resulting from a failure to properly maintain or
oprate the tool; or (IV) resulting from any repair or maintenance services performed by any party other than ALS.
ADVANCED LIGHTING SYSTEMS