WARNINGS AND CAUTIONS
WARNING
• Risk of electrical shock. This pump is
supplied with a grounding conductor and
grounding–type attachment plug. To
reduce the risk of electric shock, be
certain that it is connected only to a
properly grounded, grounding- type
receptacle (GFCI).
• Do not exceed the voltage shown on the
pump.
• Always disconnect pump from the power
source before beginning any maintenance
or work on the pump.
• Inspect cord for damage before
installation and/or maintenance. Replace
the entire pump assembly if damage is
found.
• Do not remove the grounding pin from the
power cord plug.
• Risk of electrical shock – This pump has
not been investigated for use in swimming
pool or marine areas.
CAUTION
• This pump has been evaluated for use
with water only.
• Use a proper power source as indicated
on the pump label.
• Keep the cord away from high
temperatures or other heat sources.
• Avoid using the pump when water
temperatures fall below 41° F.
• Do not use the pump in water exceeding
86° F.
• Do not pump heated liquids.
• Do not let the pump run dry. Pump must
be completely submerged for proper
operation and cooling.
WARNINGS AND CAUTIONS
(Cont’d)
• Operate in freshwater only. Avoid heavily
chlorinated water and water with high pH
levels.
• Do not lift the pump by its power cord.
PREPARATION
Before beginning assembly or operation
of
product, make sure all parts are present.
Compare parts with package contents list on
the cover and diagram on the reverse side of
this document. If any part is missing or
damaged, do not attempt to assemble, install
or operate the product. Contact customer
service for replacement parts.
•
Estimated Assembly Time: 5 minutes
•
No tools required for assembly.
WARRANTY
This warranty is offered to you as an extra
benefit and does not affect your rights as a
consumer in any way. This unit has been
checked for compliance to performance
requirements at the time of manufacture and
are made in accordance with the
requirements set forth in UL778 to insure safe
operations over the life of the product. This
pump is warranted against manufactured
defect for one (1) year from the date of
purchase. Proof of purchase is required for all
warranty claims. The warranty is not valid if
defects are caused by tampering, negligence,
misuse or not observing safety warnings. No
responsibility is assumed for indirect damage
that may result from the use of this appliance.
ASSEMBLY INSTRUCTIONS
1. Connect tubing to the outlet of the pump.
Fig 1
NOTE: Tubing is NOT INCLUDED
2. Place the pump into the water and
connect to a proper power source.
Fig. 2
Adapter
Tubing
Fig. 1
Fig. 2
