ALPS ELECTRIC Co., LTD
1.Preface
This document describes the requirements and operation of the Passive Entry System. However, this
document is especially for the Entry system ECU (acronym for Electric Control Unit) and the FOB.
The FOB consists the following functionality for passive access and active access:
•
Door unlocking / locking (however, only for request by means of switch operation)
•
Trunk unlocking / locking (however, only for request by means of switch operation)
•
LF decoding
•
RF encoding
•
Communication data encryption (cryptograph, anti-collision, rolling code and stuff)
And the entry system ECU consists of the following functionality:
•
Door unlocking / locking
•
Trunk unlocking / locking
•
Engine start (/ stop)
•
LF encoding
•
RF encoding
•
Communication data encryption (cryptograph, anti-collision, rolling code and stuff)
•
LF antenna unit control
•
Communication with the node ECUs connected to the body bus (e.g. CAN, J1850, customer
dependent bus)
As a further function, both the FOB and the entry system ECU provides the following function:
•
Learning mode for programming the manufacturing data and stuff
•
Data locking and password protection
•
Diagnostic (based upon ISO9141 if required)