User Guide Information Version1.0
May 19, 2006
(5) Compliance statement to FCC
The following statement is expressed on the user’s instruction manual of the end product.
This module complies with part 15 of the FCC rules. Operation is subject to the
following conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
5.2 Canada
In general, I.C (Industry Canada) follows the FCC in terms of emission levels and other regulatory
requirements.
5.2.1 Compliance statement for IC
This device complies with Industry Canada RSS-210. Operation is subject to the following conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
5.2.2 RF exposure compliance
(1) This module may be installed into any end product in mobile device applications.
Because the module only radiates very low power level, it complies with RF exposure requirements.
(2) The installer of this device must ensure that the antenna is located or pointed such that it does not
emit RF field in excess of Health Canada limits for the general population; consult Safety
Code 6, obtainable from Health Canada’s website www.hc-sc.gc.ca/rpb.
5.2.3 Meaning of certification number
The meaning of the marking of “IC:1788F-UGPZ8” on the UGPZ module means:
“1788F-UGPZ8” is the certification number, and the term “IC’ before the equipment certification number
only signifies that Industry Canada technical specifications were met.
5.2.4 Requirements to end product
The following provisions for end product will be required on the Canada regulation.
(1) Antenna
The UGPZ8 module provides own internal metal antenna.
ALPS wishes that our customer shall use the module without any modifications including antenna.
If customer use a unique antenna, the I.C (Industry Canada) certification is required for the end product.
(2) Co-location.
This UGPZ8 module must not be co-located or operated in conjunction with any other antenna or
transmitter.
(3) Markings
To satisfy Industry Canada exterior labeling requirements, the following text must be placed on the
exterior of the end product.
Contains Transmitter Module IC: 1788F- UGPZ8
Any similar wording that expresses the same meaning may be used.
Copyright
©
2005 ALPS ELECTRIC CO., LTD.
page4
