48
-EN
Rear Seat Entertainment Setup
[Rear Seat Entertainment]
is selected on the System Setup Menu screen
in step 1. See “System Setup” (page 44).
When a Rear monitor equipped with HDMI input is connected to this
unit, change this setting to “On.” You can output images to the Rear
monitor. For details, see “Rear Seat Entertainment Function” (page 19).
Setting item:
Rear Seat Entertainment
Setting contents:
Off (Initial setting) / On
• When this setting is “On,” you can use this unit to switch the
Plasmacluster or Illumination of a Rear monitor with the Plasmacluster
function or Illumination function.
Setting the Rear Seat Entertainment System
Make sure the Rear Seat Entertainment is set to “On” (
). See “Rear
Seat Entertainment Setup” (page 48).
Setting item:
Plasmacluster/Illumination Color
Setting contents:
Off (Initial setting) / On
• For details on adjusting Plasmacluster/Illumination, see “Rear Seat
Entertainment Function” (page 19).
• When the Rear Seat Entertainment setting is set to “Off,” you cannot
select this item.
• Set the coordination color and Plasmacluster controls on the Rear
monitor to “Navi.” When set to “Rear monitor,” you cannot operate
them from this unit.
Make sure the Rear Seat Entertainment is set to “On” (
). See “Rear
Seat Entertainment Setup” (page 48).
For remote control operation, the remote sensor of the external device
(Rear monitor, etc.) can be switched, as you prefer.
Setting item:
Remote Sensor
Setting contents:
Front (Initial setting) / Rear
• You can also control this setting from the Rear Seat Entertainment
System Setup screen. For details, see “Rear Seat Entertainment
Function” (page 19).
External Accessories Setup
[External Accessories]
is selected on the System Setup Menu screen in
step 1. See “System Setup” (page 44).
When using an external audio processor, set to “On” (
).
Setting item:
External Audio Processor
Setting contents:
Off (Initial setting) / On
• When this setting is “On,” the Volume level is fixed at 10. Also, Balance/
Fader/Subwoofer Level/Subwoofer Phase/Bass/Treble/MX HD/EQ
Presets/Dual HD EQ/X-Over/Time Correction/Defeat/Phone Speaker/
Default Sound Settings are set to “Off ” or “Flat” and cannot be
adjusted.
• Use the External Audio Processor to adjust volume.
Remote Sensor Setting
Front:
The remote sensor of this unit is effective.
Rear:
The remote sensor of Rear monitor is effective.
Setting the External Audio Processor
Summary of Contents for X109D
Page 2: ......
Page 103: ...103 EN List of Language Codes For details see page 69 ...
