35
-EN
01GB05VPAB222.fm
ALPINE VPA-B222 68-02065Z86-A (EN)
Phase Switching
1
Check that the Defeat mode is off (page 10).
2
Press and hold
MUTE/RTN/SETUP
for at least 2
seconds.
The SETUP screen is displayed.
3
Press the
joystick
up or down to select
AP SETUP
,
then press the
joystick
right.
The AP SETUP screen is displayed.
4
Press the
joystick
up or down to select
PHASE
SETUP
, then press the
joystick
right.
5
Press the
joystick
up or down to select the desired
speaker.
6
Press the
joystick
left or right to switch the phase
(0°or 180°).
7
Press
MUTE/RTN/SETUP
to return to the previous
screen.
Graphic Equalizer Adjustments
The graphic equalizer allows you to modify the sound using 31 bands
each for the front (left and right), rear (left and right) and center
speakers. An additional 10 bands are available for the subwoofer. This
allows you to customize the sound to suit your taste.
1
Check that the Defeat mode is off (page 10).
2
Press and hold
MUTE/RTN/SETUP
for at least 2
seconds.
The SETUP screen is displayed.
3
Press the
joystick
up or down to select
AP SETUP
,
then press the
joystick
right.
The AP SETUP screen is displayed.
4
Press the
joystick
up or down to select
G-EQ
.
5
Press the
joystick
left or right to select
L/R
or
L+R
.
When parametric EQ is adjusted, this setting will be turned
off.
6
Press the
joystick
up or down to select
G-EQ
SETUP
, then press the
joystick
right.
7
Press the
joystick
up or down to select the desired
channel, then press the
joystick
right.
8
Press the
joystick
up or down to select the desired
frequency.
9
Press the
joystick
left or right to adjust the level of
the desired frequency.
Adjustable level: -9 to +9
To adjust other frequencies, repeat steps 8 and 9.
To adjust other channels, repeat steps 7 and 9.
10
Press
MUTE/RTN/SETUP
to return to the previous
screen.
•
When the speaker is set to the “OFF” mode, the graphic equalizer
for that speaker cannot be set. Refer to “Setting the Speakers”
(page 33).
•
Check the playable frequency ranges of the connected speakers
before making the equalizer adjustments. If the speaker’s playable
frequency range is 55 Hz to 30 kHz, for example, adjusting the 40 Hz
or 20 Hz band has no effect. Additionally, you may overload and
damage the speakers.
•
When graphic EQ is adjusted, the adjustment for parametric EQ
becomes ineffective.
Parametric Equalizer Adjustments
The frequency bands of the graphic equalizer are fixed. This makes it
very difficult to correct for undesired peaks and dips at specific
frequencies. The parametric equalizer’s center frequency can be tuned
to these specific frequencies. Then, the bandwidth (Q) and level are
fine-tuned, independently, to make the necessary corrections. The
parametric equalizer function is an advanced tool for serious
audiophiles.
1
Check that Defeat mode is off (page 10).
2
Press and hold
MUTE/RTN/SETUP
for at least 2
seconds.
The SETUP screen is displayed.
3
Press the
joystick
up or down to select
AP SETUP
,
then press the
joystick
right.
The AP SETUP screen is displayed.
4
Press the
joystick
up or down to select
P-EQ
.
5
Press the
joystick
left or right to select
L/R
or
L+R
.
When graphic EQ is adjusted, this setting will be turned off.
6
Press the
joystick
up or down to select
P-EQ
SETUP
, then press the
joystick
right.
7
Press the
joystick
up or down to select the desired
channel, then press the
joystick
right.
8
Press the
joystick
up or down to select the desired
band, then press the
joystick
right.
9
Press the
joystick
up or down to select the desired
item, then press the
joystick
left or right to adjust
the desired mode.
To adjust other bands, repeat steps 8 and 9.
To adjust other channels, repeat steps 7 and 9.
L/R:
Different adjustment values can be set for the left and
right channels.
L+R:
Sets the same adjustment values for the left and right
channels.
L/R:
Different adjustment values can be set for the left and
right channels.
L+R:
Sets the same adjustment values for the left and right
channels.
FREQUENCY
:
Selects the frequency.
LEVEL:
Adjusts the level.
Adjustable level: -9 to +9
Q:
Adjust the bandwidth.
Adjustable bandwidth: 0.5/1/2/3/4/5
01GB00VPAB222.book Page 35 Friday, January 20, 2006 6:37 PM
Summary of Contents for Vehiclehub Pro VPA-B222
Page 61: ......
