Alpine TUE-T152, Owner'S Manual

Page: 9 / 18

FR
ES
DE
SE
IT
7
-EN
Automatic Memory of Channel
Presets
Broadcasting stations that can be received within
the present TV area and all the channels
receivable are automatically memorized.
Refer to page 6 for channels of each TV area.
1
Press the BAND button.
The band is switched each time the button is
pressed.
2
Press the A.MEMO button.
The auto preset operation starts.
3
After the completion, memorized channel
number list displays for about 5 seconds and the
first memorized station is automatically received.
NOTES
• In poor receive conditions, a broadcasting not
received may be recorded.
• If a channel receivable does not exist, NO PRESET
will appear and unit returns to the status before
starting the auto preset.
• For TV3 band, all the broadcasting stations of PAL
and SECAM are searched and channel numbers are
displayed on the display in order of stations received.
When SECAM is being searched, “SECAM” is
displayed on the display.
• The voice receiving sensitivity of TV3 band lowers by
approx. 6 dB, but this is not due to breakdown.
• When stopping the auto preset halfway, press the
A.MEMO button again during the search. Auto preset
operation comes to an end by the channel at which
search was completed.
Tuning to Preset Channel
Call a TV broadcast station memorized by the
auto memory.
1
Press the BAND button.
The band is switched each time the button is
pressed.
2
Press the or button.
The memorized station is called each time the
button is pressed.
NOTE
In case none of the stations can be called by the auto
memory, this operation is impracticable.
TV3 TV1 TV2
TV3 TV1 TV2
Manual Channel Selection
1
Press the or button.
Channels are changed 1 CH by 1 CH.
Automatic Seek Tuning
Broadcasting stations that can be received within
the present TV area are automatically seeked.
Refer to page 6 for channels of each TV area.
1
Press the or button to automatically seek
for a channel downward or upward respectively.
The unit will stop at the next channel it finds.
Press the same button again to seek the next
channel.
NOTES
• When the PWR button or the BAND button or the
MODE button is pressed while Automatic Seek is in
operation, SEEK operation comes to an end. Then
operation is changed over to a mode of the button
that was pressed by memorizing a channel at which
the SEEK operation was completed.
• When the receiving condition is bad, there may be the
case of receiving the channel which picture is not
clear.