12
-EN
01GB05TMEM860.fm
ALPINE TME-M740BT 00-00000Z00-A (EN)
Adjusting the Touch Panel (SCREEN ADJUSTMENT)
(RESET) /
(SETUP)
Adjustment becomes necessary when the display position on
the LCD and the touch position on the touch panel do not match.
1
Touch [>>] of SCREEN ALIGNMENT.
The adjustment screen appears.
2
Accurately touch the [
] mark provided in the lower
left corner of the screen.
The screen changes to the adjustment screen.
3
Accurately touch the [
] mark provided in the upper
right corner of the screen.
This completes adjustment, and returns to the DISPLAY
setup mode screen.
•
If you have touched a location other than the [
] mark, touch [
]
to restore the adjustment screen to the initial setting.
VISUAL EQ™ Setting
BRIGHT
MIN(-15) to MAX(+15) (Initial Setting: 0)
COLOR
MIN(-15) to MAX(+15) (Initial Setting: 0)
TINT
GMAX(G15) to RMAX(R15) (Initial Setting: 0)
CONTRAST
MIN(-15) to MAX(+15) (Initial Setting: 0)
SHARP
MIN(-15) to MAX(+15) (Initial Setting: 0)
VISUAL EQ MODE
OFF(Initial Setting) / NIGHT M / SOFT / SHARP / CONTRAST / P-1
/ P-2
USER MEMORY
P-1 (Initial Setting) / P-2
You can store the settings made for "
BRIGH,
COLOR,
TINT, CONTRAST
and SHARP."
After adjusting
BRIGH,
COLOR,
TINT,
CONTRAST and
SHARP, select the preset number (P-
1) or (P-2) and store it by touching [WRITE].
•
You can recall the VISUAL EQ mode stored here from P-1 or P-2 of
"
VISUAL EQ Mode" (page 12).
CINEMA:
The monitor displays a normal picture by stretching out
the picture vertically. This mode is good for displaying a
cinema type picture at the 16 : 9 ratio.
NORMAL: The monitor displays a normal picture at the centre of the
screen with a vertical black band at each side.
CINEMA
NORMAL
OFF :
Initial Setting
NIGHT M.: Suitable for movies in which dark scenes frequently
appear.
SOFT:
Suitable for CGs and animated films.
SHARP:
Suitable for old movies where images are not clearly
shown.
CONTRAST: Suitable for recent movies.
P-1:
Recalls the VISUAL EQ mode being stored on preset
No.P-1 from "
USER MEMORY" (page XX).
P-2:
Recalls the VISUAL EQ mode being saved on preset
No.P-2 from "
USER MEMORY" (page XX).
01GB00TMEM860.book Page 12 Monday, October 16, 2006 1:50 PM
