background image

 This may cause parts to become loose resulting in hazards or product failure. DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.
Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

HAVE THE WIRING AND INSTALLATION DONE BY AN EXPERT. The wiring and installation of this unit requires special technical skill and experience.

To ensure safety, always contact the dealer where you purchased this product to have the work done. KEEP THE VOLUME AT A LEVEL WHERE YOU CAN

STILL HEAR OUTSIDE NOISE WHILE DRIVING.

Failure to do so may result in an accident. USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS. Use for other than its designed application may result

in fire, electric shock or injury. 3 CAUTION IN USE DO NOT USE A MOBILE PHONE NEAR THIS PRODUCT. Use of a mobile phone may cause

interference and noise. DO NOT EXCEED THE INPUT LEVEL SPECIFIED FOR THIS PRODUCT. If there is distortion or a popping noise from the

subwoofer, the input level is too high. If the subwoofer has prolonged use in this condition, this may result in deterioration of performance or may cause

damage to the subwoofer. DAMAGE CAUSED BY EXCESSIVE INPUT LEVEL WILL NOT BE COVERED UNDER WARRANTY. EN TROUBLESHOOTING

If you have a problem with the product then please check the following before taking for repair.

SYMPTOMS Unit does not operate. (For example if the fuse is blown) REASON SOLUTION The head unit is not powered up. Power up the head unit. Earth

lead is not connected properly. Check the earth lead connection The power lead to the battery is not connected properly.

Check the battery lead connection There is power but no sound. The fuse is blown. Replace with a fuse of the correct rating. Remote turn on lead is not

connected properly. Check the remote turn on lead connection RCA leads are not connected.

Connect RCA leads correctly. Speaker level input cables are not connected properly Check the speaker level input cable connections. The gain is not at the

correct level for the system. Adjust the gain setting to an appropriate level for the system. 4 SPECIFICATIONS MAX POWER OUTPUT. CROSSOVER

INPUT IMPEDANCE OPERATIONAL VOLTAGE. EARTH TYPE. SENSITVITY DIMENSIONS. WEIGHT 350W 50~150Hz 20k Ohm (Line Input) 50k Ohm

(Speaker Input) DC 14.4V (Operational between: 11~16V) Negative Earth 96dB/10W.

m 340mm x 390mm x 395mm 9.5kg EN PACKING LIST PRODUCT NAME 7-Pin connector QTY 1 PRODUCT NAME Speaker to RCA connector (1M) QTY 2

INTRODUCTION · Please ensure that there is sufficient length of the various cables for your desired subwoofer location. · Certain products are incompatible

with this subwoofer. Please read the instructions of the product that will be used with the SWD-2030, alongside this manual during installation. 1.

INSTALLATION 1 2 Park the car at a safe place, on a level surface. Apply the handbrake and remove the key. Work out where to install the subwoofer, and

check that there is sufficient cable length. Carry out the Installation. WARNING - DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring.

Failure to take such precautions may result in fire. 5 WARNING - DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE

GROUND CONNECTIONS. Bolts or nuts used for the brake or steering systems (or any other safety related system), or tanks should NEVER be used for

installations or ground connections. Using such parts could disable control of the vehicle and cause fire, etc.

1 2 Check for instalation locations and possibilities. Decide where you want to have the subwoofer located. EN 2. CONNECTION 1 2 3 4 5 6 Ground

connection (Chassis) Battery extension lead Fuse 20A Remote Connector RCA and speaker input left RCA and speaker input right 2 5 6 1 3 4 Socket for SWD

2030 compact plug 6 1 FIRST · Make all connections securely.

You're reading an excerpt. Click here to read official ALPINE
SWD-2030 user guide

http://somemanuals.com/dref/1080394

Reviews: