3
2.
Double-click the pairing button on each speaker
at the same time
. You should hear a tone from each
speaker, followed by one of the spe
aker’s Bluetooth Indicator Light flashing BLUE, and then the other
speaker’s Bluetooth Indicator Light “Steady” BLUE.
3.
Connect the Speakers by setting your Bluetooth-enabled device to search for the Bluetooth devices.
4.
If there are no paired devices in range when the speaker is turned on, it will go into pairing mode
automatically. If a paired device is in range, the speaker will connect to it automatically.
-Pairing an iOS Phone/Device:
•
Go to Settings > Bluetooth. Make sure Bluetooth is ON.
-Pairing an Android Phone/Device:
•
Go to Settings >Bluetooth.
•
Search for devices. Make Sure Bluetooth is ON.
-Pairing other Cell Phones/Devices:
•
Review the instruction manual that came with your phone/device.
5.
When the Bluetooth device finds the speaker, select “Alpine Corporation” from the list of discovered
Bluetooth devices.
6.
After a successful pairing, a tone will be heard and the Bluetooth indicator light will light up BLUE.
7.
Set the Speakers in your preferred location within 25 ft. of each other.
Note:
If you take your Bluetooth device out of range of the second speaker (50 ft. or 15m), the first speaker will remain
paired. However, if you take your Bluetooth device out of range of the first speaker, both speakers with lose their
pairings and stop playing.
Playing Music
To enjoy wireless music on your Bluetooth speaker, make sure that you are connected to a Bluetooth-enabled device.
Open your media player and press PLAY. Once playback begins, you can control the music and volume from your
connected device. Playback time on built-in battery is approximately 12 hours, depending on music level and other
factors.
Troubleshooting to pair speakers
Speakers not connecting to Bluetooth-Enabled device
1. If your device does not show ALPINE CORPORATION in your Bluetooth List
➢
Check all previously connected devices to the speakers, and make sure they are all disconnected and
Remove the speakers from your Bluetooth List.
2. Make sure both speakers are charged & turned on (for charging instructions, please see manual)
3. Connect to alpine corporation in your Bluetooth settings to your device. A chime from the speakers will indicate
that your device has been successfully connected to the speakers.
If only (1) speaker has sound (follow these steps below)
1. Your speakers must have (1) Bluet
ooth Indicator Light “flashing”, and the other must have a “steady” light before
your device can be connected. If both Bluetooth indicator lights are “flashing”
➢
Double click the “small” pairing button on any of one of the speakers. Only (1) speaker should
have a
“flashing “light after this is performed
2. You must only have (1) ALPINE CORPORATION in your Bluetooth List, If your device shows (2) ALPINE
CORPORATION on your Bluetooth list, you must remove both on your device.
➢
iOS devices: go to settings>Bluetooth> click the (i) icon > forget device
➢
Android devices: go to settings> Bluetooth > click Gear icon> click unpair
3. Turn on both speakers, allow 5 seconds for the speakers to set up. You will hear chimes from speakers
intermittently during set up.
4. Connect to alpine corporation in your Bluetooth settings. A chime from the speakers indicate that your device
has been successfully connected to the speakers.
