Alpine PXE-X800, Manual, Page: 3 / 29

2
Operating instructions
Types of precautions
Forbid
Represents forbidden actions (must not
do).
Forbid
Represents that dismounting is forbidden
Compulsory
Represents compulsory operations
(must do).
Represents that you should pay close
attention to it.
Warning
In case of problems, please stop using the device
immediately.
Otherwise, it may result in personal injury or damaged product.
Please return the product to the authorized Alpine dealer or
nearby Alpine service center for repair.
The product is only suitable for the 12V negative-
grounded vehicles.
Otherwise, it may lead to an accident like fire, etc.
Please call the professionals to wire and install.
It needs professional expertise and experiences to wire and install
the product. For safety, please contact the dealer from whom you
bought the product to install it.
Please do not disassemble or re-fit.
Otherwise, it may result in an accident, fire or electric shock.
Small items like bolts or screws should be kept
out of the reach of child.
If ingested, it may result in severe injury. Once ingested, please seek
medical attention immediately.
Please do not use any function that may distract
you when driving.
Any function that may influence your attention should be used only
when the vehicle is stopped completely. To use these functions,
please first stop your vehicle in a safe area. Otherwise, it may result in
an accident.
When driving, you must maintain the volume
at a level such that the noise outside can still
be heard
.
It is very dangerous not to clearly hear an emergency vehicle alarm
and road warning signal (such as railway crossing) and may result in
an accident. Moreover, a too loud volume may damage your hearing.
Caution
Product cleaning
Please clean the product regularly with a dry soft cloth. For any dirt
difficult to clean, only water can be used to soak the cloth. Any other
solvents may lead to dissolution.
Temperature
Before starting the device, please ensure that the temperature inside
the vehicle is b60°C and -20°C.
Repair
In case of problems, please do not repair by yourself. Please return
the product to the authorized Alpine dealer or nearby Alpine service
center to repair.
System matching
When using PXE-X800 to distribute signal to DP-653/DP-65C by
active frequency division mode, please make sure that the cross-over
frequency of the treble is above 1500 Hz to avoid damage to the treble
loudspeaker.
Installation site
The device cannot be installed at the following locations:

Under direct sunlight and near a heat source.

With high humidity and near a water source.

Dusty sites.

Environments with violent vibration.
Copyright notice
The text mark and logo of Bluetooth® are the registered trademarks held by Bluetooth SIG, Inc. Alpine Electronics has
been authorized to use these text mark and logo. Other trademarks and names all belong to their holders.
*The electronic products should be discarded via an appropriate recycling channel to reduce electronic waste pollution.