Operating Instructions
2
3
1
/
4
Connect the supplied cigarette lighter power
cable before continuing
Power ON
Press the Power Button
2
.
Power OFF
Press and hold the Power Button for 5 seconds and
release.
Adjusting Volume
Press Volume Up
3
to increase the volume.
Press Volume Down
1
to decrease the volume.
Power Indicator
4
Shows the current power status.
The power indicator will blink red when the input
voltage is at a critical level. It is recommended to check
and/or charge the source.
Output Modes
Press and hold buttons
1
and
3
to switch between
vehicle and max power mode.
Output Mode
Power Indicator
Vehicle Mode
Partial
Max Power Mode
Full
Note: Vehicle mode is the default setting and will operate
safely in most vehicle cigarette lighter applications.
Max Power mode should only be used with a
power source rated at 15A or higher
Bluetooth Pairing
When the PWD-CB1 is powered ON, search for
Alpine
PWD-CB1
using a Bluetooth compatible device. Once
connection is established, the Bluetooth
2
and Power
Indicator Bar
4
will be ON.
Source
Bluetooth and
Power Indicator
LED Color
Bluetooth
Pairing mode
Blinking
Blue
Bluetooth
Paired
ON
Blue
AUX Input
ON
Green
Unpairing Bluetooth Device
Press the source button twice to unpair with bluetooth
device.
Source Switching
Press the Power Button
2
to switch between Bluetooth
and AUX input.