3
Using Your Outdoor Low Voltage Transformer Product
Unpack all components carefully. Please check to ensure all parts have
been removed from the packaging.
The photo timer sensor (PTS) can be installed for 100W 12VAC
transformer for garden light use. Our product is engineered to meet the
highest standard of functionality and design. Its simple structure enables
users to operate it easily. It is a functional and intelligent photo time sensor.
1
: Used for input power 120VAC 60Hz. Bulb must be at 12VAC.
2
: Adjust the time rotary control switch, please see Fig 4.
You can choose from either of the following settings:
•
OFF:
Power off, Bulb will not light.
•
ON:
Power on, Bulb will always light.
•
AUTO:
Bulb will automatically light when sensor detects
dark environment.
•
4H:
Bulb will automatically light when sensor detects dark
environment and will turn off after four (4) hours.
•
6H:
Bulb will automatically light when sensor detects dark
environment and will turn off after six (6) hours.
•
8H:
Bulb will automatically light when sensor detects dark
environment and will turn off after eight (8) hours.
3
: If bulb does not light up, check the circuit breaker.
4
: Should a short circuit occur, the secondary breaker will trip and
shut off the system. Remove the cause of the shutdown and wait
4 minutes. Then reset the breaker by pressing the ‘Circuit
Breaker’ button.
5
: Supports bulbs up to 100 watts (do not exceed 100VA).
6
: Cold and heat resistant at ambient temperature between
14°F to 104°F (-10°C to 40°C).
2