6
-EN
Adjusting Picture
Brightness, color, tint, contrast and sharpness can be
adjustable.
• Each source can be adjustable individually.
• Adjusting should be made within 10 seconds, otherwise
OSD (On Screen Display) will be automatically turned
off.
• When the adjustment is made, “FLAT” setting in Visual
EQ changes to “CUSTOM”. After reset, “CUSTOM”
changes back to “FLAT”
1
Press and hold the
SELECT
button for at
least 2 seconds to open SETUP screen. Make
sure the PICTURE display mode is selected.
SELECT
Front Panel Controls
SELECT
Remote Control
Adjusting Brightness
2
Press
▲
or
▼
and select BRIGHT.
3
Press
or
to adjust the brightness.
Brightness can be adjusted from –15 (MIN) to
+15 (MAX).
4
Press the
ENT
button to
fi
nish adjustments
or wait 10 seconds until OSD disappears; the
adjustment will be saved automatically.
Adjusting Color Density
2
Press
▲
or
▼
and select COLOR.
3
Press
or
to adjust the color density.
Change depth can be adjusted from –15 (MIN)
to +15 (MAX).
4
Press
ENT
to
fi
nish adjustments or wait
10 seconds until OSD disappears; the
adjustment will be saved automatically.
Adjusting Tint
2
Press
▲
or
▼
and select TINT.
3
Press
or
to adjust the tint. Tint tone can
be adjusted from G15 (G MAX) to R15 (R
MAX).
4
Press
ENT
to
fi
nish adjustments or wait
10 seconds until OSD disappears; the
adjustment will be saved automatically.
Adjusting Contrast
2
Press
▲
or
▼
and select CONTRAST.
3
Press or to adjust the contrast. Contrast
can be adjusted from –15 (LOW) to +15
(HIGH).
4
Press
ENT
to
fi
nish adjustments or wait
10 seconds until OSD disappears; the
adjustment will be saved automatically.
TW_PKG-RSE.indb EN6
TW_PKG-RSE.indb EN6
4/25/05 4:50:56 PM
4/25/05 4:50:56 PM
