Alpine PDX-M6, Service Manual, Page: 7 / 39

Specifications
Power Output (1) 20Hz, 4ohm, 1.0% T.H.D. (14.4V) 600W
100Hz, 4ohm, 1.0% T.H.D. (14.4V) 600W
(2) 20Hz, 2ohm, 1.0% T.H.D. (14.4V) 600W
100Hz, 2ohm, 1.0% T.H.D. (14.4V) 600W
T.H.D. (100Hz, 200W/ 4ohm (14.4V)) 0.1%
Residual Noise (Input Short, Non-Filter) 5.0mV
S/N Ratio (Input Short)
(1) Ref.Output 1W/ 4ohm, CEA-2006 78dB
(2) Ref.Output 600W/ 4ohm 106dB
Frequency Response (Ref.Output 1W/ 4ohm, Ref.Frequency 50Hz) 10Hz : -0.5±2dB
400Hz : -3.0±2dB
Output Offset Voltage (No Signal)
±
150mV
Input Sensitivity (Ref.Output 600W/ 4ohm, 100Hz) (Volume Position : MAX)
Input Level Switch Position : 0.1Vrms~1.0Vrms 0.125V±3dB
Input Level Switch Position : 1.0Vrms~8.0Vrms 1.0V±3dB
SUB-SONIC Filter (Ref.Output 1W/ 4ohm, 50Hz at SUB-SONIC Filter Switch: OFF)
SUB-SONIC Filter Switch Position : 15Hz -3.0±2dB
SUB-SONIC Filter Switch Position : 30Hz -3.0±2dB
Low Pass Filter (Ref.Output 1W/ 4ohm, 50Hz at Low Pass Filter Volume: MAX (400Hz)) -3.0±2dB
Pre-Out Level at 1.0Vrms Input CH1 : 1.0Vrms±3dB
CH2 : 1.0Vrms±3dB
Remote On Voltage 6.4±1.0V
Current Drain (1) No Signal 2.1A
(2) 1% T.H.D., 2ohm Load 80A
(3) Remote Current Drain 0.33±0.2mA
(4) Back Up Current Drain 1.2mA
Input Impedance (Reference) 20.40Kohm±10%
Fuse Requirement 20A(Peak) x 4 (For Battery Line)
Power Source DC14.4V (11~16V)
Dimensions (W x H x D) 257 x 50.8 x 192mm
Weight 2.82kg
NOTE : Due to Continuing product improvement, specifications and designs are subject to change without notice.
All manuals and user guides at all-guides.com