Assembling & Using Your Product
Unpack all components carefully. Please check to ensure all parts have been
removed from the packaging.
Components:
LED9003T Light
Transformer
Stake
Photocell
Operating Instructions:
•
This light must be used with a transformer. Please use a transformer
with the correct wattage and never exceed the maximum wattage
indicated on the transformer
•
Before plugging in the unit, be sure the input voltage indicated on your
transformer is the same as your local power supply. If not, please do not
operate the light until you obtain the appropriate transformer from your
local dealer.
•
To reduce the risk of electrical shock, inspect all cords for damage
before installation.
•
Plug the connector of the light into the socket on the transformer and
screw the coupling until tight.
•
Plug the transformer into the outlet.
Changing the Bulb or Lenses to your Illumination Light:
•
Make sure to unplug the transformer and remove it from the water (if
submerged)
•
After allowing a sufficient amount of time for the light to cool, let it dry
and remove the lens retainer from the light by pushing on it and turning
counter-clockwise quickly.
•
Remove the lens carefully and make sure the “O” ring stays in place
•
Gently pull out the socket and remove the bulb and replace with the new
set rating power bulb by aligning the pins of the bulb into the socket.
•
Gently push the new bulb down, DO NOT force it. Turn power bulb
around if it does not fit easily.
•
To maintain a water tight seal, make sure the lens is flush with the front
lip of the rubber seal.
•
Make sure the lens is on the rubber seal then take the cover and place it
correctly onto the slots of the light, turning tightly clockwise.
•
Make sure the cover is tightly locked
Trouble Shooting & Caution
If you have any questions and/or problems, please contact the retail store you
purchased this light.
If the light fails to illuminate, please check the following:
•
Check that the light set is getting power by testing another applicant in
the power outlet that the lights use
•
Check to ensure that your light bulb has not burned out from usage
•
If water gets into any of your lights, lift it out of the water, remove the
lens and empty the water until dry
Caution & Warning
•
Always handle the light from the base. The light housing can and will
become HOT!
•
Operating the lights with missing or damaged covers can result in risk of
fire or electrical shock
•
Use ONLY recommended Alpine rating power bulbs
•
Do not exceed the voltage & wattage indicated on the transformer
•
This light assembly has not been tested or designed for use in
swimming pools and hot tubs
Fl uor es c ent l i ght
f i x t ur es
Pl as t i c s c r ew
Li ght i ng body
Lamp hol der
Lamp c up
O- r i ng
Sheet gl as s
Fi l l et of s c r ew
Fi x ed r i ng