2
3
!!! Caution !!!
!!! Caution !!!
Remark
4
Harness
Connection
6
Retracing
Vehicle
Parts
3
Removing
Vehicle
Parts
5
Bracket
Assembly
1
3
Bracket
Screw 2 Pcs.
Screw 3 Pcs.
The head unit
1. Remove part no.
1
by
removing all clips off.
2. Remove plastic cover
2
by
removing all clips off.
3. Remove A/C console
3
by
removing all clips off.
4. Remove A/C connector
4
from
A/C console.
5. Remove audio panel
5
by
removing all 4 screws.
6. Remove all connectors
6
from
the head unit.
7. Remove all A/C control
connectors
7
from A/C
controller
9
8. Remove
bracket
8
both left
and right sides of audio panel
by removing all 10 screws (5
screws each side).
9. Remove A/C controller
9
from
audio panel by removing all
clips off.
Make sure that all the accessories are
off so that you do not cause a spark
1. Connect the Alpine-Toyota
power cord
1
into the car
connectors both 10P and 6P.
2. Connect the Alpine-Toyota
antenna cable
2
into the car
connectors.
Make connection between connectors
tightly (until you hear “Click”)
Screw
3 Pcs.
A/C Controller
2
Screw 2 Pcs.
1. Connect A/C controller
1
with
audio panel by pressing all clips
tightly.
2. Install
bracket
2
with audio panel
both left and right sides by using 4
black screws (2 screws each side).
3. Install the head unit
3
from rear
side into audio panel by using
6 screws (3 screws each side).
A/C Control
Connector
A/C Connector
5
3
2
Alpine-Toyota
power cord
1
8
Connect Alpine-Toyota
power cord into unit
7
4
6
Screw 4 Pcs.
Plastic cover
Perform full function checks for the
head unit. If no problem found
assemble back all the parts to their
original position.
1. Connect the Alpine-Toyota
connector
1
and the Alpine-
toyota antenna cable
2
into
the head unit tightly until you
hear “Click”.
2. Connect A/C Control connec-
tor
3
into A/C control tightly
until you hear “Click”.
3. Drive 4 screws
4
to make it
tight between the head unit
and console.
4. Connect A/C connector
5
with A/C console.
5. Connect A/C console
6
into
car console by pressing all
clips to dash panel until you
hear “click”.
6. Install plastic cover
7
by
pressing all clips tightly into
console.
7. Install part no.
8
by pressing
all clips tightly into console.
Plastic Cover
2
A/C Console
3
5
1
Screws 4 Pcs.
6
7
Audio Connector
A/C Control
Connector
9
Audio panel
A/C Controller
Alpine-Toyota antenna cable
Antenna cable
2
1
Alpine-Toyota power cord
10P
6P
Connect these connectors firmly
4
A/C Connector
8
Bracket
A/C Console