4
-EN
Basic Operation
Using the Bluetooth Handsfree
Telephone Feature
Pairing a phone to the KCA-100BT:
The KCA-100BT supports Bluetooth Handsfree
profi le. After connecting the interface to the head unit,
you must pair your phone with the KCA-100BT for
the very fi rst time in order to enable handsfree phone
functionality.
1
Turn on your head unit.
2
Press and hold the button on the
three button remote for 8 seconds.
The blue LED on the KCA-100BT will blink
rapidly, when the unit is ready to be discovered
by your phone.
3
Search for new Bluetooth devices from
your phone.
You should fi nd “Alpine KCA-100BT” as a new
device within 10-20 seconds.
• See phone user guide for specifi c instructions
on how to enable Bluetooth functionality on
your phone
4
Select the device for pairing.
(sometimes also called “bond”)
When it asks you for the PIN code, enter
“0000”.
5
You will receive confi rmation from the
phone, when paired successfully.
If the module is visible, the blue LED will blink
at a slow, steady rate when it is paired to a
device.
Initiating a hands-free call:
1
Press the button to place a call.
2
The head unit displays
INTERRUPT
or
TEL
depending on model of Alpine
head unit.
•
If the paired phone supports voice tag calling,
you should observe the phone requesting a
name or command.
On some phones you may also hear voice
prompts through the vehicle speakers.
•
If your phone does not have voice tag
functionality, you will have to dial the number
on the phone handset and then press the
button.
• To increase or decrease the volume of the call,
press the – or + button on the three button remote.
Answering a call:
1
Regardless whether your car radio is
on or off, when your phone received
a call, the head unit will show
INTERRUPT
or
TEL
2
Press the button on the three button
remote to answer the call.
• To increase or decrease the volume of the call,
press the – or + button on the three button remote.
Ending a call:
1
Press the button on the three button
remote.
Your head unit will go back to the original
source
