Alpine IVE-W560BT, Owner'S Manual

Page: 24 / 96

24
-EN
Sound
There is no sound/sound skips/sound crackles.
A connection has not been made correctly.
Check the connection between this unit and the connected
equipment, and set the input selector of the equipment to
the source corresponding to this unit.
The disc is defective or dirty.
Installation is not correct.
Install the unit at an angle of less than 45° in a sturdy
part of the car.
The MP3 file sampling rate is not 32, 44.1, or 48 kHz.
The WMA file sampling rate is not 44.1 kHz.
The MP3 file bit rate is not 48 to 192 kbps.
The WMA file bit rate is not 48 to 192 kbps.
The unit is in pause/reverse/fast-forward mode.
The settings for the outputs are not made correctly.
The DVD output level is too low (page 15).
The volume is too low.
The ATT function is activated.
The format is not supported (such as DTS).
Check if the format is supported by this unit (page 21).
Sound is noisy.
Keep leads and cables away from each other.
Disc operation
The disc does not play.
The disc is defective or dirty.
The disc is not playable.
The DVD is not playable due to the region code.
The disc is not finalized (page 7).
The disc format and file version are incompatible with
this unit (page 9).
Press to remove the disc.
MP3/WMA/Xvid/MPEG-4 files do not play.
Recording was not performed according to the ISO 9660
level 1 or level 2 format or the Joliet or Romeo expansion
format (DATA CD), or the UDF Bridge format (DATA DVD)
(page 9).
The file extension is incorrect (page 7).
Files are not stored in MP3/WMA/Xvid/MPEG-4 format.
If the disc contains multiple file types, only the selected
file type (audio/video) can be played.
Select the appropriate file type using the list
(page 15).
MP3/WMA/Xvid/MPEG-4 files take longer to play than
others.
The following discs take a longer time to start playback.
a disc recorded with a complicated tree structure.
a disc to which data can be added.
Certain functions cannot be performed.
Depending on the disc, you may not be able to
perform operations such as stop, search, or repeat/
shuffle play. For details, refer to the manual supplied
with the disc.
The soundtrack/subtitle language or angle cannot be
changed.
Use the DVD menu instead of the direct selection
button on the remote control (page 13).
Multilingual tracks, multilingual subtitles, or multi-
angles are not recorded on the DVD.
The DVD prohibits changing.
The operation buttons do not function.
The disc will not eject.
Press the reset button (page 10).
USB playback
Items cannot be played via a USB hub.
Connect iPod/USB devices to this unit without USB hub.
Items cannot be played.
Reconnect the USB device.
The USB device takes longer to play.
The USB device contains large-sized files or files with a
complicated tree structure.
The sound is intermittent.
The sound may be intermittent at a high bit rate of more
than 320 kbps.
BLUETOOTH function
The other BLUETOOTH device cannot detect this unit.
Set [Bluetooth Connection] to [ON] (page 19).
While connecting to a BLUETOOTH device, this unit
cannot be detected by another device.Terminate
the current connection and search for this unit from
the other device. The disconnected device can be
reconnected by selecting from the list of registered
devices.
Connection is not possible.
Check the pairing and connection procedures in the
manual of the other device, etc., and perform the
operation again.
The name of the detected device does not
appear.
Depending on the status of the other device, it may not
be possible to obtain the name.
There is no ringtone.
Increase the volume while receiving a call.