Alpine INE-W987A, Owner'S Manual, Page: 43 / 105

43
-EN
Side Camera screen example
4
Touch [ ] , [ ] , [ ] or [ ] to adjust the position of the
guide.
• Touching [Clear] clears adjustments and returns to the setting
before guide line alteration.
5
After the adjustment is completed, touch [Set] .
Adjusting Guides Simultaneously (for Rear/Side Camera
only)
<Rear Camera>
1
Touch [Link] .
The 3 vertical guides of the currently-selected guide link
together, allowing them to be adjusted simultaneously.
• Note on the yellow guide line “ ” in the centre
The yellow guide line “ ” in the centre is controlled by a system that
locates it in the centre of the two yellow guide lines, “ ” and “ ”
on the left and right, or the green line “ ” on the top and red guide
line “ ” below. Therefore you cannot move it manually.
<Side Camera>
1
Touch
[Link]
.
The 2 vertical guides of the currently-selected guide link
together, allowing them to be adjusted simultaneously.
Turning Guide Display On/Off (Rear/Front Camera only)
Turning the selected guide off.
1
Touch [On/Off] .
The currently selected guide will turn off.
2
To turn the guide on, touch [On/Off] again.
• Guides that are turned off are still adjustable.
Returning Guides to Default
1
Touch [Default] .
A message window will appear.
2
Touch [OK] .
Adjusted values will return to default settings.
You can set whether to display the rear camera image when the gear
lever is moved to the reverse (R) position while the unit is turned off.
You can select this item only when Camera Select is “Rear.”
Setting item:
Interrupt (Power OFF)
Setting contents:
On (Initial setting) / Off
When connecting the optional Multi Camera Interface module, you can
connect up to 3 cameras as Front Camera/Rear Camera/Side Camera.
• When using the optional Multi Camera Interface module, select
“Camera Selector” to set the “Front Camera /Rear Camera/Side
Camera” to ”On”(
)/”Off ”( ).
Setting item:
Front Camera / Rear Camera / Side Camera / Default Camera*
Setting contents:
Off (Initial setting) / On
* You can change the Default Camera only when you set more than one
camera for Front Camera/Rear Camera/Side Camera to “On.” For
details, see “Setting a Default Camera” (page 44).
Camera Interrupt Setting (Power OFF Mode)
(Rear Camera Only)
On: The rear camera image is displayed
Off: The rear camera image is not displayed
Setting Multi Camera to On/Off
Camera
Signal: See “Setting the Camera Input” (page 42)
Guide
Adjustment: See “Adjusting the Rear/Front/Side Camera Guide”
(page 42)
Camera
Interrupt
(Power Mode): See “Camera Interrupt Setting (Power OFF Mode) (Rear
Camera Only)” (page 43)