Alpine INA-N333RRS, Service Manual

Page: 54 / 88

INA-N333RS/INA-N333RRS
No. Symbol I/O Terminal Description
30 OSCI I High-speed OSC input terminal.
31 OSC0 O High-speed OSC output terminal.
32 VSS - GND potential supply terminal.
33 NC - No connect terminal.
34 /NMI(PULL-UP) - Pull-up connect terminal.
35 /RST I HARD RESET input terminal from power supply/HOST.
36
37
38 /INT0 I MN103S26E /INT0 signal terminal.
39 /INT1 I MN103S26E /INT1 signal terminal.
40 /CPUIRQ I MN103S26E /CPUIRQ signal terminal.
41 /EJECT I Eject key terminal. (using interrupt at Stand-by)
42 /LOAD_SW I
OR Signal input terminal of Mechanism SW-1/SW-2.
(using interrupt at STAND-BY)
43 /MRST I NM103S26E N-MRST input terminal.
44 /SLEEP I SLEEP Mode signal input terminal from HOST.
45 WAIT I MN103S26E N-RESET/WAIT signal input terminal.
46 /WAKEUP O MN103S26E STAND-BY cancellation signal terminal by NTRYCL signal.
47
I
49
50 VDD - Power supply terminal.
51 TEST3
52 TEST2
53 TEST1
54 TEST0
55 FG O FG signal input terminal.
56 FEPSENS O AN8709 SENSE signal terminal.
57 CPUDTIO O AN8709 CPUDTIN signal terminal.
58 SCK O AN8709 SCK signal terminal.
59 (SBD) I YDC Flash writer SBD signal terminal.
60 (SBO) I YDC Flash writer SBO signal terminal.
61 (SBT) I YDC Flash writer SBT signal terminal.
62 UDRX I UART receiving signal terminal. (DEBUG side : not used)
63 UDTX O UART transmitting signal terminal. (DEBUG side)
64 FEPRES O AN8709 RESETsignal terminal.
65 UCRX I UART receiving signal terminal. (COMMAND side)
66 UCTX O UART transmitting signal terminal. (COMMAND side)
67 NC - No connect terminal.
68 VDD - Power supply terminal.
69 VSS - GND potential supply terminal.
70 AVSS - ANALOG GND potential supply terminal.
71 Vref- - ANALOG standard (-) voltage terminal.
72 HALFSENS I VHALF power supply terminal.
73 SLEDSENS I SLED control signal input terminal.
74 HITEMP I High-temperature signal input terminal.
75 LOTEMP I Low-temperature signal input terminal.
76
I
78
NC - No connect terminal.
NC - No connect terminal.
- No connect terminal. NC
O TEST terminal.
- 54 -
TO CONTENTS
TO SCHEMATIC