Alpine iLX-F309E, Owner'S Manual

Page: 42 / 79

43
-EN
01GB05iLX-F309E.fm
ALPINE iLX-F309E 68-34732Z79-A (EN)
Camera Setup
[Camera] is selected on the System Setup Menu screen in step 1. See
“System Setup” (page 42).
You can set up items related to the Camera.
Setting item:
Camera Select
Setting contents:
Off (Initial setting) / Rear
When the camera is connected, the video input signal type can be
chosen.
Further setting item:
Camera Signal
Setting contents:
NTSC (Initial setting) / PAL
You can adjust the camera guide position.
Setting item:
Guide Adjustment
1
Touch [Guide Adjustment] .
The camera guide adjustment screen is displayed.
2
Touch [Adjust] .
• If
[Adjust]
does not appear, proceed to step 3.
3
Touch the guide you intend to adjust.
Guide line can also be selected by touching [ ] [ ] .
Rear Camera screen example
• You cannot adjust the position of the yellow guide line “ ” in
the centre independently.
It is controlled by a system to be the centre of the two yellow guide
lines “
” and “ ” on the left and right, or the central green
line “ ” and red guide line “ ”.
4
Touch [ ] , [ ] , [ ] or [ ] to adjust the position of the
guide.
• Touching [Clear] clears adjustments and returns to the setting
before guide line alteration.
5
After the adjustment is completed, touch [Set] .
Adjusting Guides Simultaneously
<Rear Camera>
1
Touch [Link] .
The 3 vertical guides of the currently-selected guide link
together, allowing them to be adjusted simultaneously.
• Note on the yellow guide line “ ” in the centre
The yellow guide line “ ” in the centre is controlled by a system that
locates it in the centre of the two yellow guide lines, “ ” and “ ”
on the left and right, or the green line “ ” on the top and red guide
line “ ” below. Therefore you cannot move it manually.
Turning Guide Display On/Off
Turning the selected guide off.
1
Touch [On/Off] .
The currently selected guide will turn off.
2
To turn the guide on, touch [On/Off] again.
• Guides that are turned off are still adjustable.
Returning Guides to Default
1
Touch [Default] .
A message window will appear.
2
Touch [OK] .
Adjusted values will return to default settings.
You can set whether to display the rear camera image when the gear
lever is moved to the reverse (R) position while the unit is turned off.
You can select this item only when Camera Select is “Rear.”
Setting item:
Interrupt (Power OFF)
Setting contents:
On (Initial setting) / Off
Setting the Camera Input
Off: No camera is connected
Rear: Rear camera is connected
Setting the Camera Signal Input
Adjusting the Rear Camera Guide
Camera Interrupt Setting (Power OFF Mode)
On: The rear camera image is displayed
Off: The rear camera image is not displayed
01GB00iLX-F309E.book Page 43 Friday, December 22, 2017 2:38 PM