10
Remove
the USB device from Alpine Head Unit.
14
Check firmware version in Setup:
Menu
→
Setup
→
System
→
About
→
Firmware Version.
If “
Firmware Version
” number is displayed as
“
1.1.270
” in
SETUP
menu (see picture right) of the
Alpine Head Unit, this update procedure has been
successful.
Installing the Update Software (USB Stick)
9
The update is finished when the screen (see picture
right) is displayed. Press the “
OK
” button. The
Alpine Head Unit will reboot automatically.
8
Press
“
Yes
” button when update message appears on the screen.
13
The Alpine Head Unit will reboot automatically.
ALPS ALPINE EUROPE GmbH, Alpine Brand
11
Reset the Alpine Head Unit by clicking:
Menu
→
Setup
→
System
→
About
→
Clear All Settings
: Press the “
Reset
” button.
Attention:
All personal audio settings will be deleted!
Update will be completed in around 3 minutes.
12
Press the "
OK
" button again when the message appears on the screen.
Installing the Update Software (USB Stick)
1
Store the downloaded and extracted files
“
iLX-F905D_USB-Stick.zip
” on the empty USB
device in the Root Folder (see left figure).
2
Turn on the
vehicle’s ignition to turn on the Alpine Head Unit.
5
Connect the USB stick to the USB port:
USB 1 2.4A Android Auto
of your Alpine Head
Unit (see picture page before, below right). Press
“
OK
” to start the update.
3
Press the
“
Menu
” button (Hard Key) on the Alpine Head Unit to enter the settings.
Press the
“
Setup
” button on screen and then press “
System
” on screen.
4
Now press the
“
About
” button on the screen. In the
About
menu, you will see the current
Firmware Version
and the
“
Update
” button for executing the firmware update.
Now press the
“
Update
” button.
“
Checking the update file...
”
can take up to 60 seconds.
6
After checking the update file on USB stick, a
screen with the pre-installed and the new firmware,
Current Version
and
New Version
is displayed.
7
Press the
“
Update
” button again to start the update.
iLX-F905D / iLX-F115D / iLX-705D / i905D Serie
Software Update Procedure