Alpine i407-WRA-JK Installation Manual Download Page 1 | Manualshive

Page: 1 / 18

Alpine i407-WRA-JK Installation Manual Download Page 1

Jeep Wrangler

i407-WRA-JK 20210811v1

1/18

Jeep Wrangler

i407-WRA-JK
Restyle Installation Manual

Model: Wrangler JK

Model Year: 2007-2018

Note:

Design and specifications are subject to change without notice for improvement.

To Ensure Safe Use, Always Follow These Precautions

The installation of this product requires specialized skills and experience. We recommend that you have the
product installed by an Alpine authorized dealer.

Before you use this product, be sure to carefully read this installation manual and the separate user's manual
so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as
a result of failure to follow the instructions in the manuals.

This manual includes a number of symbols that are intended to help you use the product safely, to prevent
harm to you and others, and to protect against damage to property. These symbols and their meanings are
listed below. Make sure you fully understand these symbols before you begin reading the main text.

Explanations of Injury and Damage That May Result from Incorrect Use

Warning

Ignoring the content marked by this indication and using the product incorrectly is

expected to lead to death or serious injury.

Caution

Ignoring the content marked by this indication and using the product incorrectly is only

expected to lead to injury or property damage.

Jeep

Model

Year

Wrangler JK

2007-2018

* The specified vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is

not guaranteed if the manufacturer has made production changes to the listed vehicles above.

Warning: Before you begin wiring, remove the ground wire from the negative

terminal of the battery. Failing to do so can lead to electric shock, injury or damage

to equipment.

Introduction

Congratulations on purchasing the i407-WRA-JK. This installation manual is designed to take you through the
step-by-step installation of the i407-WRA-JK into a 2007-2018 Jeep Wrangler JK. Please familiarize yourself
with the owners manual and if you still have additional questions please call 1-800-TECH-101.

1
2
3
...
»

Summary of Contents for i407-WRA-JK



















Reviews:

No comments