manualshive.com logo in svg

Alpine DVA-9965R, Owner'S Manual

Share
Download
Alpine DVA-9965R Owner'S Manual Download Page 10

9

-EN

ALPINE DVA-9965R 68-02065Z31-A (EN)

Detaching and Attaching the Front Panel

Detaching

1

Turn off the unit power.

2

Press 

 (Release) at the upper left side until the

front panel pops out.

3

Grasp the left side of the front panel and pull it out.

• The front panel may become hot in normal usage (especially the

connector terminals on the back of the front panel). This is not a
malfunction.

• To protect the front panel, place it in the supplied carrying case.

Attaching

1

Insert the right side of the front panel into the main
unit. Align the groove on the front panel with the
projections on the main unit.

2

Push the left side of the front panel until it locks
firmly into the main unit.

2

1

1

• Before attaching the front panel, make sure that there is no dirt or

dust on the connector terminals and no foreign object between the
front panel and the main unit.

• Attach the front panel carefully, holding the sides of the front panel

to avoid pushing buttons by mistake.

Radio

Listening to Radio

1

Press 

SOURCE/POWER

 until a radio frequency

appears in the display.

2

Press 

BAND 

repeatedly until the desired radio

band is displayed.

FM-1 

→

 FM-2  

→

 FM-3 

→ 

MW 

→ 

LW 

→

 FM-1

3

Press 

TUNE/A.ME

 to select the tuning mode.

DX (Distance mode) 

→

 LOCAL (Local mode) 

→

MANUAL (Manual mode)

 → 

DX

• The initial mode is Distance mode.

Distance mode:

Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).

Local mode:

Only strong stations will be automatically tuned in (Automatic
Seek Tuning).

Manual mode:

The frequency is manually tuned in steps (Manual tuning).

4

Press 

g

 or 

f

 to tune in the desired station.

Holding down 

g

 or 

f

 will change the frequency

continuously.

• The ST indicator appears on the display when a stereo FM station

is tuned in.

• With the DVA-9965R, you can tune the radio with the 

GlideTouch

bar

. Press 

FUNC. 

to select the source operation mode. Press the

GlideTouch bar

 under the desired function shown in the function

guide display.

BAND

SOURCE/
POWER

g

 f

FUNC.

GlideTouch bar

TUNE/
A.ME

Summary of Contents for DVA-9965R













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands