manualshive.com logo in svg

Alpine CDM-7870R, Owner'S Manual

Share
Download
Alpine CDM-7870R Owner'S Manual Download Page 10

8

-EN

Basic

Basic Operation

Setting the Bass Control

You can change the Bass Frequency emphasis
to create your own tonal preference.

1

Press the BASS C. button to turn on the Bass
setting mode.

2-1

 Setting the Bass frequency:

Press the 

g 

DN or  

f 

UP button to select

the desired Bass centre frequency.

60Hz 

↔

 80Hz 

↔

 100Hz 

↔

 200Hz

Emphasizes the displayed Bass frequency
ranges.

2-2

 Setting the Bass Band Width (Q-Factor):

Press the BAND button to select the desired
Bass Band Width.

Changes the displayed frequency's band width to
wide or narrow.

2-3

 Setting the Bass Level:

Press the 

55555

 or 

66666

 button to select the desired

Bass Level (-7~+7).
You can emphasize or weaken the bass
frequency.

NOTES

•

If no buttons are pressed within 5 seconds, the Bass
control setting will be turned off automatically.

•

The settings of the Bass will be individually
memorized for each source (FM, MW (LW), CD,
tape, changer and AUX) until the setting is changed.
Depending on the connected devices, some functions
and display indications do not work.

Setting the Treble Control

You can change the Treble Frequency emphasis
to create your own tonal preference.

1

Press the TREBLE C. button to turn on the
Treble setting mode.

2-1

 Setting Treble frequency:

Press 

g 

DN or  

f 

UP button to select the

desired Treble center frequency.

     10kHz 

↔

 12.5kHz 

↔

 15kHz 

↔

 17.5kHz

Emphasizes the displayed Treble frequency
ranges.

2-2

 Setting Treble Level:

Press the 

55555

  or 

66666

 button to select the desired

Treble Level (-7~+7).
You can emphasize the treble frequency.

NOTES

•

If no buttons are pressed within 5 seconds, the Treble
control setting will be turned off automatically.

•

The settings of the Treble will be individually
memorized for each source (FM, MW (LW), CD,
tape, changer and AUX) until the setting is changed.
Depending on the connected devices, some functions
and display indications do not work.

→

 WIDE1 

→

 WIDE2

→

 WIDE3 

→

 WIDE4

(Wide)

←

→

(Narrow)

...........................

BASS C.

g 

DN

f 

UP

BAND

6

5

SETUP

TREBLE C.

DISP

SOURCE

Summary of Contents for CDM-7870R































Reviews:

No comments

Brands by name

Popular brands

Load more brands