9
-EN
*
The illustration is for CDE-W235BT.
*
The illustration is for CDE-W233R.
Accessory List
• Head Unit ..................................................................................1
• Power Cable ..............................................................................1
• Microphone (CDE-W235BT only).............................................1
• Mounting Sleeve ......................................................................1
• Bracket Key ...............................................................................2
• Face Plate ..................................................................................1
• Rubber Cap ...............................................................................1
• Hex Bolt.....................................................................................1
• Screw (M5 × 8) ..........................................................................4
• Owner’s Manual..................................................................1 set
Turning Power On and Off
Press
SOURCE
to turn on the unit.
Note
• The unit can be turned on by pressing any other button except
.
Press and hold
SOURCE
for at least 2 seconds to turn
off the unit.
Note
• The first time power is turned on, the volume will start from level 12.
Source Selection
Press
SOURCE
to change the source.
TUNER
DISC
USB AUDIO/IPOD
*1
BT AUDIO
*2
AUXILIARY
*3
TUNER
*1
Only when the iPod/iPhone is connected.
*2
Only for CDE-W235BT.
Only when BT AUDIO is set to ON. Refer to “Setting the
BLUETOOTH Connection (BT IN)” on page 26.
*3
Only when AUX SETUP is set to ON. Refer to “Setting the AUX
SETUP Mode” on page 23.
Initial System Start-Up
Be sure to press the
RESET
button when using the unit for the first time,
after changing the car battery, etc.
1
Turn off the unit power.
2
Press
RESET
with a ballpoint pen or similar pointed object.
Adjusting Volume
Turn the
Rotary encoder
until the desired sound is
obtained.
Getting Started
SOURCE/
/ENTER
Rotary encoder
AUDIO/SETUP
SOURCE/
/ENTER
Rotary encoder
SETUP
RESET button
