9
-EN
Manual Storing of Station Presets
1
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2
Press the
F/SETUP
button so that the "FUNC"
indicator light goes out. Press and hold the
Preset buttons (1 through 6)
that you want to
store the station on for at least 2 seconds.
The selected station is stored. The display shows
the band, preset No. and station frequency
memorized.
3
Repeat the procedure to store up to 5 other
stations onto the same band.
To use this procedure for other bands, simply
select the band desired and repeat the
procedure.
A total of 24 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2,
MW and LW).
NOTE
If you store a station in a preset memory which already
has a station, the current station will be cleared and
replaced with the new station.
Automatic Memory of Station
Presets
1
Press the
BAND
button repeatedly until the
desired radio band is displayed.
Each press changes the band:
2
Press and hold the
TUNE/A. ME
button for at
least 2 seconds.
The tuner will automatically seek and store 6
strong stations in the selected band in order of
signal strength.
The frequency on the display continues to
change while the automatic memory is in
progress.
When the automatic memory has been
completed, the tuner goes to the station stored
in the preset location No. 1.
NOTE
If no stations are stored, the tuner will return to the
original station you were listening to before the auto
memory procedure began.
Tuning to Preset Stations
1
Press the
BAND
button repeatedly until the
desired band is displayed.
Each press changes the band:
2
Press the
F/SETUP
button so that the "FUNC"
indicator light goes out. Then press the station
preset button that has your desired radio station
in memory.
The display shows the band, preset number and
frequency of the station selected.
→
F1(FM1)
→
F2(FM2)
→
MW
→
LW
→
F1(FM1)
→
F2(FM2)
→
MW
→
LW
Indicators on the CDM-9825RB/CDM-9823R
The underline is lit when the function is activated.
