background image

12

-EN

CD Player Operation

-

 / 

J

SOURCE

c

Inserting/Ejecting Disc

1

Insert a CD half way into the slot with the label
side facing up. The player automatically draws
the disc into the disc compartment.

The Disc indicator appears to show that a disc
is loaded.

NOTE

Three-inch (8cm) CD's can be used.

2

Press the 

c

 button when you want to eject the

CD.

NOTES

If the CD is not removed for several seconds after it
has been ejected, the player automatically draws the
CD into the compartment to protect the CD.

Do not insert or remove a CD when loading or
ejecting a CD, as malfunction may result.

About the usable discs.

We recommend using only compact discs containing
the marks shown below.
You can play CD-Rs (CD-Recordable)/CD-RWs (CD-
ReWritable) for audio use on this unit. You can not also
play CD-Rs/CD-RWs containing MP3 formatted audio
files.

Some of the following CDs may not play on this unit:
Flawed CDs, CDs with fingerprints, CDs exposed to
extreme temperatures or sunlight (e.g., left in the car
or this unit), CDs recorded under unstable conditions,
CDs not designed for audio use, CDs on which a
recording failed a re-recording was attempted.

On handling Compact Discs (CD/CD-R/
CD-RW)

 Do not touch the surface.

 Do not expose the disc to direct sunlight.

 Do not affix stickers or labels and do not write on the

surface.

 Clean the disc when it is dusty.

 Make sure that there are no bumps around thedisc.

 Do not use commercially available disc accessories.

Do not leave the disc in the car or the unit for a
long time. Never expose the disc to direct sunlight.

Heat and humidity may damage the CD and you may
not be able to play it again.

DN

 

f

 UP

M.I.X.

REPEAT

Summary of Contents for CDE-7860R





























Reviews: