manualshive.com logo in svg

Alpine CDE-7826E, Owner'S Manual

Share
Download
Alpine CDE-7826E Owner'S Manual Download Page 28

28

English

In Case of Difficulty

Radio Mode

Symptom

Unable to receive stations.

Unable to tune stations in the seek mode.

Broadcast is noisy.

Cause and Solution

•

No antenna or open connection in cable.
– Make sure the antenna is properly

connected; replace the antenna or cable
if necessary.

•

You are in a weak signal area.
– Make sure the tuner is in the DX mode.

•

If the area you are in is not known to be a
weak signal area, the antenna may not be
grounded and connected properly.
– Check your antenna connections; make

sure the antenna is properly grounded at
its mounting location.

•

The antenna may not be the proper length.
– Make sure the antenna is fully extended;

if broken, replace the antenna with a new
one.

•

The antenna is not the proper length.
– Extend the antenna fully; replace it if it is

broken.

•

The antenna is poorly grounded.
– Make sure the antenna is grounded

properly at its mounting location.

Summary of Contents for CDE-7826E

































Reviews:

No comments

Brands by name

Popular brands

Load more brands