manualshive.com logo in svg

Alpine CDE-154BT, Operating Instructions Manual

Share
Download
Alpine CDE-154BT Operating Instructions Manual Download Page 48

48

-EN

Connect USB cable to an iPod/iPhone with Interface cable for iPod.

Remove the iPod/iPhone

Remove the iPod/iPhone from Interface cable for iPod.

Notes

• After changing the unit to a source other than the USB iPod, remove the 

iPod/iPhone. If the iPod/iPhone is removed in the USB iPod mode, data 
may cause damage.

• If sound is not output or the iPod/iPhone is not recognized even when 

the iPod/iPhone is connected, remove the iPod/iPhone once, then 
connect it again, or reset the iPod.

• Do not leave the iPod/iPhone in a vehicle for a long time. Heat and 

humidity may damage the iPod/iPhone and you may not be able to play 
it again.

Connect Flash Memory

Connect the USB cable to the USB connector of the unit.

Remove Flash Memory

Pull out Flash Memory squarely from the USB cable.

Notes

• When removing Flash Memory, pull it out straight.
• If sound is not output or Flash Memory is not recognized even when 

Flash Memory is connected, remove Flash Memory once, then connect 
it again.

• Change to a source other than the Flash Memory mode, then remove 

the Flash Memory. If the Flash Memory is removed in the Flash 
Memory mode, data may be damaged.

• Route the USB cable away from another cables.

Mounting the Microphone

For the sake of safety, mount the microphone in the following location.
• In a stable and secure location.
• In a location that does not inhibit safely driving the vehicle.
• Mount the microphone in a location where the driver’s voice can 

easily be picked up.

Choose a location for the microphone that can easily pick up the drivers 
voice. Requiring the driver to move towards the microphone for 
audibility causes a distraction that could be dangerous.

iPod/iPhone Connection (sold separately)

Flash Memory Connection 
(sold separately)

Interface cable for iPod (included with iPod/iPhone)

USB cable (Supplied)

This unit

Flash Memory 
(sold separately)

USB Cable (Supplied)

USB Connector

This unit

Flash Memory 
(sold separately)

USB Connector

USB Cable (Supplied)

Summary of Contents for CDE-154BT





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands