8
-EN
Setting Time
1
Press
SETUP
to activate the SETUP mode.
2
Turn the
Rotary encoder
to select the
CLOCK ADJ mode, and then press the
Rotary encoder
or
/
/
ENT
.
The time indication will blink.
3
Turn the
Rotary encoder
to adjust the hours
while the time indication is blinking.
4
When the hour has been adjusted, press the
Rotary encoder
or
/
/
ENT
.
5
Turn the
Rotary encoder
to adjust the
minutes while the time indication is blinking.
6
Press
SETUP
to return to normal mode.
•
To synchronize the clock to another clock/watch or radio
time announcement, press and hold the
Rotary encoder
or
/
/
ENT
for at least 2 seconds after setting the
“hour”. Minutes will reset to “00”. If the display shows
over “30” minutes when you do this, the time will
advance one hour.
•
Pressing /
MUTE
will return to the previous mode.
•
If no operation is performed for 60 seconds, the unit will
return to normal mode automatically.
Listening to Radio
1
Press
SOURCE/
to select TUNER mode.
2
Press
BAND
repeatedly until the desired
radio band is displayed.
F1 (FM1)
F2 (FM2)
AM
F1 (FM1)
3
Press
TUNE/A.ME
to select the tuning mode.
SEEK DX (Distance mode)
SEEK LO (Local mode)
MANUAL (Manual mode)
SEEK DX
•
The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically
tuned in (Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in
(Automatic Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual
tuning).
4
Press
or
to tune in the desired
station.
Holding down
or
will change the frequency
continuously.
Controllable with Remote Control
This unit can be controlled with an optional Alpine
remote control. For details, consult your Alpine dealer.
Point the optional remote control transmitter at the
remote-control sensor.
Remote control sensor
Radio
BAND
TUNE/A.ME
Preset buttons
(1 through 6)
SOURCE/
Rotary encoder
/ESC
/MUTE
