18
-EN
01GB05CDA9884.fm
ALPINE CDA-9884E 68-09359Z41-A (EN)
Setting the External Digital Input
When an ALPINE Ai-NET compatible digital audio processor
(PXA-H701) and a DVD player (DVE-5207) not compatible with
Ai-NET are connected, set D-AUX to ON to enjoy 5.1-channel
surround sound.
You can change the D-AUX NAME display when D-AUX is set to ON.
Press /
ENT
when D-AUX is set to ON, and select D-AUX NAME
by turning the
Rotary encoder
, then press
/
ENT
. After that, turn
the
Rotary encoder
to select the desired D-AUX NAME.
•
Press
SOURCE/
, and select the DIGITAL-AUX mode, and adjust
the volume, etc.
•
After input selection is completed, turn the ignition off and back on
again. Setting of the optical digital input switch is completed.
•
Depending on the connected audio processor, DVD player sound
may continue to be output, even though the source is changed to
another one. If this occurs, set the DVD player’s power to OFF.
Setting the AUX Mode (V-Link)
You can input TV/video sound by connecting an optional Ai-NET/RCA
Interface cable (KCA-121B) or Versatile Link Terminal (KCA-410C) to
this component.
You can change the AUX NAME display when AUX IN is set to ON.
Press
/
ENT
when AUX IN is set to ON, and select AUX NAME by
turning the
Rotary encoder
, and then press
/
ENT
.
After that, turn the
Rotary encoder
to select the desired AUX name.
If the KCA-410C is connected, it is possible to select two AUX names.
•
Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press
SOURCE/
to select AUX mode and
then press
BAND
to select your desired device.
Controlling USB memory (Optional)
A USB memory may be connected to this unit. With a USB memory
connected to this unit, the USB memory will be controllable from this
unit.
•
The controls on this unit for USB memory operation are operative
only when a USB memory is connected.
Playing MP3/WMA/AAC Files with the
USB memory (Optional)
If you connect a USB memory containing MP3/WMA/AAC, you can
play these files on this unit.
1
Press
SOURCE/
to switch to the USB AUDIO
mode.
The mode will change every time the button is pressed.
TUNER
DISC
USB
AUDIO
iPod
*
1
/AUX+
*
2
BT AUDIO
*
3
CHANGER
*
4
TUNER
*
1
Displayed only when the iPod is connected and AUX
+
SETUP is set
to OFF, refer to “Setting the AUX
+
SETUP Mode” (page 17).
*
2
Displayed only when the AUX
+
SETUP is set to ON, refer to “Setting
the AUX
+
SETUP Mode” (page 17).
*
3
Only when BLUETOOTH IN is set to ADAPTE, refer to “Setting the
Bluetooth Connection” (page 16).
*
4
Only when the CD Changer is connected.
2
To pause playback, press
/
.
Pressing
/
again will resume the playback.
•
The root folder is displayed as “ROOT” in the Folder Name Search
mode.
•
This unit plays back files on a USB memory device with the same
controls and modes as playback of CDs containing MP3/WMA/AAC.
For details, refer to “CD/MP3/WMA/AAC” on pages 8 to 11.
•
Before disconnecting USB memory, be sure to change to another
source or set to pause.
•
The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
D-AUX ON / D-AUX OFF (Initial setting)
AUX IN ON / AUX IN OFF (Initial setting)
USB memory (Optional)
SOURCE/
/
01GB00CDA9884.book Page 18 Friday, September 28, 2007 10:24 AM
