8
-EN
Connections with other equipments
When upgrading the system, you may need to change the switch.
• System Switch (Bottom of the unit)
When connecting an equalizer or divider using Ai-NET feature, place this switch in the EQ/
DIV position. When no device is connected, leave the switch in the NORM position.
To change the switch, turn the power off and insert a pointed object vertically.
To change the switch, follow the procedure below.
1) Unplug the power cable.
2) Insert a pointed object vertically.
3) Change to the specified position.
4) Connect the power cable.
• External Amplifier and Changer Connection
System
Switch
NORM
(L)
(R)
(L)
(R)
Yellow
Yellow
Red
Black
Black
Orange
Blue
Blue/White
Pink/Black
(L)
(R)
Fuse (5A)
Ai-NET CD Changer
(Sold Separately)
Fuse (5A)
Choke Coil
Front Output
RCA Connectors
Antenna Receptacle
To antenna plug of the vehicle
To remote control interface box
Input
Front Speaker
Front Amplifier (Sold separately)
Remote Turn-ON Lead
Remote Turn-ON Lead
Subwoofer Amplifier (Sold separately)
Rear Amplifier (Sold separately)
Rear Speaker
Subwoofer Speaker
Input
Input
RCA Extension Cable
(Sold Separately)
RCA Extension Cable
(Sold Separately)
RCA Extension Cable
(Sold Separately)
Remote Control
Interface Connector
Rear Output
RCA Connectors
Subwoofer
RCA Connectors
(L)
(R)
(L)
(R)
(L)
(R)
To vehicle phone
To power antenna
Connect to a metal part of chassis body with a screw.
Connect to a metal part of
chassis body with a screw.
Ignition Key
To the instrument cluster
illumination lead
Ai-NET Cable
(Included with CD Changer)
< DC-DC Converter >
AUDIO
INTERRUPT IN
REMOTE
TURN-ON
POWER ANT
ILLUMINATION
GND
GND
BATTERY
Battery
Blue/
White
Blue/
White
Blue/
White
Remote Turn-ON Lead
IGNITION
BATTERY
NOTES
•
Do not install the DC-DC converter where it will be exposed to moisture such as under the floor mat or near the air
conditioner. This may cause a malfunction.
•
Do not bundle the DC-DC converter cable with the audio cables. Noise may be induced into your system.
•
The DC-DC converter temperature can become hot. This is not a malfunction.
•
For details on turning the Subwoofer ON or OFF, see “Subwoofer On and Off” (Page 19) of the Owner’s Manual.
Ai-NET
NORM EQ/DIV
Understanding the switch.
