manualshive.com logo in svg

Alpine CDA-7837E, Owner'S Manual

Share
Download
Alpine CDA-7837E Owner'S Manual Download Page 47

47

English

Specifications

GENERAL

Power Requirement ..................................................................... 14.4V DC (11 – 16V (allowable))

Maximum Power Output (CDA-7837E) .............................................................................. 40W x 4

Maximum Power Output (CDM-7834E) ............................................................................. 35W x 4

Pre-Output Voltage ............................................................................................. 500 mV/10k ohms

Note: The above spec is used for reference

only. Actual output will be greater than
2.0V (before clipping).

Bass ....................................................................................................................... ±15 dB at 30 Hz

Treble .................................................................................................................... ±10 dB at 10 kHz

Weight ................................................................................................................ 1.6 kg (3 lbs. 8 oz)

CHASSIS SIZE

Width .............................................................................................................................  178mm (7")

Height .............................................................................................................................. 50mm (2")

Depth ............................................................................................................................. 153mm (6")

NOSEPIECE SIZE

Width ....................................................................................................................... 170mm (6-3/4")

Height ................................................................................................................... 46mm (1-13/16")

Depth ........................................................................................................................ 18mm (11/16")

*

Measured at internal amp input stage.

Note: Due to product improvement, specifica-

tions and design are subject to change
without notice.

Summary of Contents for CDA-7837E
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands