14
-EN
01GB05CDE-9870R.fm
ALPINE CDE-9870R 68-05946Z90-A (EN)
Setting the Bass Control
You can change the Bass Frequency emphasis to create your own tonal
preference.
1
Press and hold
A.SEL
for at least 2 seconds to
activate the Sound Setting mode.
2
Press
A.SEL
repeatedly to select the BASS mode.
BASS
TREBLE
HPF
BASS
3
-1 Press
BAND/TA
to select the desired bass centre
frequency.
80 Hz
100 Hz
200 Hz
60 Hz
80 Hz
Emphasizes the displayed bass frequency ranges.
3
-2 Press
SOURCE/
to select the desired bass
bandwidth.
Changes the boosted bass bandwidth to wide or narrow. A
wider setting will boost a wide range of frequencies above
and below the centre frequency. A narrower setting will
boost only frequencies near the centre frequency.
3
-3
*
1
Press
or
to select the desired bass level
(–7~+7).
You can emphasize or weaken the bass level.
4
Press and hold
/ESC
for at least 2 seconds to
return to normal mode.
•
If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
•
The bass level settings will be individually memorized for each
source (FM, MW (LW), CD, etc.) until the setting is changed. The
bass frequency and bass bandwidth settings adjusted for one source
are effective for all other sources (FM, MW (LW), CD, etc.).
•
The function is inoperable when DEFEAT is set to ON.
*
1
The adjustment can also be made by pressing
AUDIO/RTN
. Refer to
“Adjusting Bass/Treble/Balance (Between Left and Right)/Fader
(Between Front and Rear)/Loudness/Defeat” (page 13).
Setting the Treble Control
You can change the Treble Frequency emphasis to create your own tonal
preference.
1
Press and hold
A.SEL
for at least 2 seconds to
activate the Sound Setting mode.
2
Press
A.SEL
repeatedly to select the TREBLE mode.
BASS
TREBLE
HPF
BASS
3
-1 Press
BAND/TA
to select the desired treble centre
frequency.
10.0 kHz
12.5 kHz
15.0 kHz
17.5 kHz
10.0 kHz
Emphasizes the displayed treble frequency ranges.
3
-2
*
2
Press
or
to select the desired treble level
(–7~+7).
You can emphasize the treble level.
4
Press and hold
/ESC
for at least 2 seconds to
return to normal mode.
•
If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
•
The treble level settings will be individually memorized for each
source (FM, MW (LW), CD, etc.) until the setting is changed. The
Treble frequency settings adjusted for one source are effective for all
other sources (FM, MW (LW), CD, etc.).
•
The function is inoperable when DEFEAT is set to ON.
*
2
The adjustment can also be made by pressing
AUDIO/RTN
. Refer to
“Adjusting Bass/Treble/Balance (Between Left and Right)/Fader
(Between Front and Rear)/Loudness/Defeat” (page 13).
Setting the Bass Centre Frequency
Setting the Bass Bandwidth
Setting the Bass Level
Setting the Treble Centre Frequency
Setting the Treble Level
01GB00CDE-9870R.book Page 14 Wednesday, November 1, 2006 10:47 AM
