Alpine 1004 - CVA - LCD Monitor, Owner'S Manual

Page: 35 / 57

33
-EN
Setting the Clock Display
After carrying out steps 1 to 3 of "To display the
SETUP screen" (page 29), perform the operation
shown below.
1
When the monitor is open, press and hold
MUTE/SETUP for at least 2 seconds. The
SETUP screen appears.
2
Press preset 2 to select GENERAL setting
mode. Press preset 2 again to select CLOCK
DISP.
3
Press g or f to turn ON or OFF the clock
display on the monitor.
For any other settings, press preset 2 or another
preset button.
4
After setting is completed, press MUTE/SETUP
to return to normal mode.
Displaying Time
1
When the monitor is closed, press
TITLE repeatedly until the clock time is
displayed in the sub-display.
NOTES
• Selecting any function while in the clock priority mode
will interrupt the time display momentarily. The
function selected will be displayed for about 5 seconds
before the time returns to the display.
• The clock time is not shown on both the monitor and
the sub-display simultaneously.
Other Useful Features
Setting Time
After carrying out steps 1 to 3 of "To display the
SETUP screen" (page 29), perform the operation
shown below.
1
When the monitor is open, press and hold
MUTE/SETUP for at least 2 seconds. The
SETUP screen appears.
2
Press preset 2 to activate GENERAL setting
mode. Press preset 2 again to select CLOCK
ADJ., then press - / J or g / f to appear
the clock adjusting menu.
3
Press preset 2 to select HOUR. Then press g
or f to adjust the hour.
4
Press preset 2 to select MINUTE. Then press
g or f to adjust the minutes.
To quickly set the time to the nearest hour, press
preset 2 to select MINUTE ZERO, then press
- / J or g / f .
If the minutes is ":30" or under, the hour is the
current number. If the minutes is more than ":30",
or If you set the minute to "00", the hour is
moved up.
To return to the previous mode, press preset 2
to select RETURN, then press - / J , g or
f .
5
After setting is completed, press MUTE/SETUP
to return to normal mode.