TMX-R1000 / TMX-R1000P ONWERS MANUAL
a. POWER Button
Front Key Control
Press this button to turn ON the unit.
Press and Hold of this button to turn Off the unit.
While the power is ON then press Power Button, the Mute function is ON. The press
again, the Mute function is OFF.
Remote Control
Press POWER button to turn ON and OFF the unit.
Press MUTE button to mute ON and OFF.
b. SELECT Button
Press SEL Key Button, it shows the Source Select OSD. Press this button to cycle
through the display modes as AUX1, AUX2, AUX3 and AUX1.
Press and Hold SEL Key Button, it shows the SETUP Menu. Press this button to
cycle through the display modes as PICTURE, DISP MODE, SYSTEM and
PICTURE. To change the each mode, it uses 4 directional keys and ENT key.
o
PICTURE: using Up and Down directional keys to select BRIGHT, COLOR,
TINT, CONTRAST, SHAPNESS and RESET. Using Left and Right
directional keys can be changed each pictures value setting.
RESET: Press ENT key, it changes to Factory Default Picture Setting.
o
DISP MODE: using Up and Down directional keys to select WIDE, ZOOM,
CINEMA and NORMAL
o
SYSTEM: using Up and Down directional keys to select IR TRANS, FM
TRANS, FM FREQ, SOURCE NAME 1, SOURCE NAME 2, SOURCE
NAME 3, AUDIO LEVEL 1, AUDIO LEVEL 2, AUDIO LEVEL 3 and
FACTORY DEFAULT.
IR TRANS: using Left and Right directional keys to select A/B/OFF.
(Default: A)
FM TRANS: using Left and Right directional keys to select FM Radio
region (OFF/USA/JPN). (Default: OFF)
FM FREQ: using Left and Right directional keys to select desired FM
Radio Frequencies between 88.1 MHz. to 92.5MHz. USA frequency step
is 0.2MHz and Japan is 0.1MHz. (Default: 89.1 MHz)
FM Transmitter function is not available for TMX-R1000P.
Revision 3
Date 3/16/05