Alpina bl26e, Operator'S Manual

Page: 24 / 258

EN
8 HOW TO START - USE - STOP THE MOTOR / USING THE MACHINE
USING THE MOTOR (Fig. 3)
Rotor rpm must be proportionate to the type of
work and regulated with a roller (6) located on the
handgrip.
STOPPING THE MOTOR (Fig. 3)
To stop the motor:
– Release the switch (5 - OFF).
– FIRST unplug the extension lead (3) from the
mains socket (4) and THEN disconnect the
power cable (2) of the machine from the exten-
sion lead (3).
STARTING THE MOTOR (Fig. 3)
Before starting the motor::
– Fasten the extension lead (1) to the cable clamp
on the rear handgrip.
– FIRST connect the power cable plug (2) to the
extension lead (3) and THEN plug the exten-
sion lead into the mains socket (4).
– Make sure there is enough free space around
the machine.
To start up the motor:
1. Grasp the machine securely.
2. Operate the switch (5 - ON).
6. HOW TO START - USE - STOP THE MOTOR
To respect people and the environment:
– Try not to cause any disturbance.
– Scrupulously comply with local regulations
and provisions for the disposal of waste
materials after work.
– Scrupulously comply with local regulations
and provisions for the disposal of oils, pe-
trol, damaged parts or any elements which
have a strong impact on the environment.
Prolonged exposure to vi-
brations can cause injuries and neurovascular
disorders (also called “Raynaud’s syndrome”
or “white hand”), especially to people suffer-
ing from circulation disorders. The symptoms
can regard the hands, wrists and fingers and
are shown through loss of sensitivity, torpor,
itching, pain and discolouring of or structural
changes to the skin. These effects can be
worsened by low ambient temperatures and/or
by gripping the handgrips excessively tightly.
If the symptoms occur, the length of time the
machine is used must be reduced and a doc-
tor consulted.
This machine’s motor
generates an average sized electromagnetic
field, but it is not possible to exclude the pos-
DANGER!
WARNING!
sibility of interference with any active or pas-
sive medical devices that operators may be
using, with possible ensuing serious risks for
health. All those using medical devices should
always consult their GP, or the device manu-
facturer, before using this machine.
For your safety and that
of others:
1) Do not use the machine without having
read the instructions carefully. Become
acquainted with the controls and the pro-
per use of the machine. Learn how to stop
the motor quickly.
2) Residual risks: even all the safety rule are
obeyed, there still can be a certain residual
risk, which cannot be excluded. From the
kind and construction of the tool the fore-
seeable potential endangerments can be:
– Hurled materials that may injure the
eyes;
– Damage of the hearing, if no protection
of the ears is carried.
3) Keep in mind that the operator or user is re-
sponsible for accidents or hazards oc-
curring to other people or their property.
4) Always wear suitable clothing when using
WARNING!
7. USING THE MACHINE