14
15
ENGLISH
Connection panel rear of TV:
A connecting line between the CAP-converter and the SAT-socket of the TV set has already
been pre-assembled.
The marked SAT-cable from the Kathrein antenna is attached to the free angle socket.
If the device is to be connected to a normal domestic system or another SAT-cable that does
not support the KATHREIN antenna functions, then the side angle socket can be unscrewed.
The power supply plug is pushed underneath the connecting cable and inserted into the side
DC socket.
Notes:
Wi-Fi data, is displayed on the white sticker, in the case of using the
optional
KATHREIN streaming sticks which are connected to the USB socket of the CAP-converter.
This sticker must not be removed.
TV 2
TV 1
SAT-ANLAGE
SLAVE-
KOAXKABEL
MASTER-
KOAXKABEL
TV-GERÄT 2 MIT INTEGRIERTEM SAT-TUNER
oder
SAT-RECEIVER, Z.B. UFS 946/CI+
STROMVERSORGUNGS-
KABEL
ZÜNDUNG
12 V=
BORDNETZ
12 V
+ -
Initial operation Kathrein Antenna HDP 750, CAP 650, CAP 900
Before initial operation of the alphatronics device with the KATHREIN antenna,
the following requirements should be met:
Sufficiently thick cables leading from the battery or the EBL to the Kathrein antenna.
The TV is not to be connected to these lines and requires a different circuit.
If possible, compare the wiring to the image shown below.
The SAT-cable with the red marking (master coax) is connected to the TV.
A second SAT-cable is included for further TV set.
Summary of Contents for SL-19 DSB
Page 14: ...26 27 NOTIZEN NOTES...
