Manual BASICTRIPLEPILOT
version 1.3UK
Page 16 of 19
BASICTRIPLEPILOT
6
TECHNICAL SPECIFICATIONS
Instruments and processor unit:
Voltage
: 24VDC +30% -25%
Current
: max. 6A (depending on valve current and start-up gyro)
Reverse polarity safety
: yes
Functions
: Fu/WEG follow up by use of steering lever
AUTO
pilot steering with ROT input
COMP
Pilot steering with compass ROT input
AUX
standby or external control. E.g.: master/slave
Alarm
: optical and acoustical with indicators for:
- ROT failure
- power failure
- Course deviation, after 10 sec.
- rudder position failure, after 2.5 sec.
Input
: - Rate of Turn indicator ( 20mV/degree/min)
- electronic compass (20mV/degree)
- feedback 2k
.
- Rate of turn alarm
- Remote control
- NMEA (compass)
- Master/slave, in case of double independent rudder system
- slow/fast, in case of proportional steering engine
- Standby/operate
Output
: - Black/white valves 24VDC max. 2A magnetic,- or proportional
valves with adjustable current and zero
- Danfoss
- servo output, 10V tot -10V in case of Rudder propeller
- potential free contact for compass steering on/of
- main valve output
- Pilot alarm, contact
- Pilot ready, contact
- Pilot voltage alarm, contact
- NMEA (ROT, rudder, pilot)
- Solenoid output, 0V~+10V
- Rudder position output, +5V~0V~-5V
- Solenoid output, 0V~+7V
- Rate of turn (20mV/°/min), galvanic isolated
Steering lever, follow up
: non-linear/logarithmic, programmable
Steering lever, Auto
: Logarithmic
Range steering lever
: standard 90-0-90, adjustable
Max. cable length CPU/ctrl : 15 meter
Hand/auto switching
: via separate external switch
Safe compass distance
: Magnetic compass: 0,55m. Magnet steering compass: 0,3m
EMC
: Meets rhine certificate requirements
Protection rating controls
: IP22, front side
Protection rating proc.unit : IP55
Working temp
: 0
C tot 40C
Storage temp
: -20
C tot 70
C
