background image

ATTENTION

This process only needs to be programmed once. After successfully 

programming the headset the unit will automatically connect to the 

device when in Bluetooth range and is enabled.

1.  Activate the Bluetooth function on your compatible device.

2.  Press and hold down the On / Off multi function button for five 

seconds.  The status LED will start to flash 

RED

 and 

BLUE

 

alternately.

3.  Search for 

V50BT

 in the list of the compatible device and 

select connect to device.

4.  The statue LED will start to flash 

BLUE

 slowly after a          

successful connection.

LED INDICATOR

STATUS LED

Flashes Red & Blue

In pairing mode

Blinks Blue Slowly

Connected to        

compatible device

Illuminates Red

Headset Charging

Illuminate Green

Headset Charged

CONTROLS

BUTTONS

ACTION

Turn On

On/Off Multi function button

Press for 3 secs.

Pairing Mode

On/Off Multi function button

Press for 5 secs.

Play / Pause

On/Off Multi function button

Short Press

Volume UP

    

/+

  - Button

Long Press

Volume DOWN

    

/+

  - Button

Long Press

Next Track

    

/+

  - Button

Short Press

Previous Track

    

/+

  - Button

Short Press

Accept a Call

On/Off Multi function button

Short Press

Reject a Call

On/Off Multi function button

Press for 2 secs.

End Call

On/Off Multi function button

Short Press

Turn Off

On/Off Multi function button

Press for 3 secs.

CONTROLS

BLUETOOTH CONNECTION

6

7

Summary of Contents for V50BT










Reviews: