background image

ALPHASONIK WAS FOUNDED IN 1976 WITH ONE MISSION, 

TO BRING STATE OF THE ART PERFORMANCE TO THE 
CAR AUDIO ENTHUSIAST.

In these early years we pioneered such ground-breaking technologies 

as amplifier fan cooling and high voltage signal transfer which remain a 

benchmark in high-end audio.

Today, the new Alphasonik is committed to pushing the envelope with 

regards to technology, quality and value.  Our electronics feature 

audiophile parts and circuit topology designed to let the full musical 

experience come through, loud and clear.  Our loudspeakers employ 

the latest high technology materials and processes such as carbon 

reinforced woven glass and titanium vapor deposition to deliver your 

music with tremendous impact, dynamics and resolution.

We stand behind our quality with one of the best warranties in 

consumer electronics.  Compare Alphasonik car audio products against 

anything the competition has to offer.  We’re confident you will come to 

one conclusion...

A L P H A S O N I K   H A S   N O   E Q U A L .

SETTING THE P

ACE SINCE 1976

WARNING:  

This product can expose you

to chemicals including DEHP which is known 

to the State of California to cause Cancer, Birth 

Defects or other reproduction harm.  For more 

information go to 

www.P65warnings.ca.gov

.

Summary of Contents for HYPER 200 Series

















Reviews: